Advertisement
INSTALLING THE VIDEO BOARD
1. Turn the power supply switch to OFF.
2. Remove the power plug from outlet.
3. Remove the metal fittings on the installation position at the rear of
this device (M3 screw x 2).
4. Slide the video board into the installation opening along the left
and right guide pins and insert the connectors.
5. Use the accompanying screws to secure (M3 screw x 5, accompany
video board).
CAUTION:
Follow the items given below, to prevent accidental injuries and possible electrical shock.
Turn off the power supply and disconnect the power plug from outlet before installing the Video board unit.
Do not remove the cabinet when installing the Video board unit.
Do not remove screws expect for the specified user service screw marked " ".
Do not use screws other than that specified in this manual for the installation of this Video board unit.
E-9
Advertisement
