Panasonic KX-TDA50 Installation Manual page 51

Mounting on Concrete or Mortar Wall
CAUTION
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.
1.
Place the reference for wall mounting (on the last page of this manual) on the wall to mark the three
screw positions.
130 mm (5-1/8 in)
2.
Install three anchor plugs (user-supplied) in the wall.
Hammer Anchor Plug
29 mm
(1-1/8 in)
3.
Install the screws (included) in the wall.
Drive the screw
to this position.
4.
Hook the main unit on the screw heads.
250 mm
(9-13/16 in)
6.4 mm
(1/4 in)
2.2 Installation of the Hybrid IP-PBX
Installation Manual 51