Related Manuals for Samsung LE55C
Summary of Contents for Samsung LE55C
- Page 1 LFD DISPLAY User Manual LE32C LE46C LE55C The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00330A-03...
-
Page 2: Table Of Contents
(for LE32C and LE46C models only) Edit Name Connecting to a PC Removing the Packaging Connection using the D-SUB cable Source AutoSwitch Settings (for LE55C models only) (Analog type) Source AutoSwitch Checking the Components Connection using a DVI cable (Digital type) Primary Source Recovery... - Page 3 Table of contents Picture Picture Sound Select Speaker Select Mode Mode Sound Reset Custom Custom Color Tone Color Tone Color Control Color Temp. Setup Color Temp. Size Language Image Lock Digital NR Time Auto Adjustment HDMI Black Level Clock Set Sleep Timer Signal Balance Film Mode...
- Page 4 OSD Rotation Screen Adjustment Advanced Settings Advanced features Appendix Temperature Sound Adjustment Auto Power System Setup Contact SAMSUNG WORLD WIDE Button Lock Tool Settings User Auto Color Responsibility for the Pay Service Other Functions (Cost to Customers) Standby Control Group Management...
-
Page 5: Before Using The Product
© 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association. -
Page 6: Safety Precautions
Safety Precautions Cleaning ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― Take the following steps when cleaning. Caution ― The following images are for reference only. Real-life situations may differ from what is shown in the RISK OF ELECTRIC SHOCK DO NOT OPEN images. -
Page 7: Storage
Storage Connect the power plug to a grounded power socket (type 1 insulated devices only). High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used • An electric shock or injury may result. nearby. ―... -
Page 8: Installation
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • A fire may result. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • A fire or electric shock may result. - Page 9 SAMSUNG • Be sure to consult Samsung Customer Service Center if you want to install the product at such a place.
-
Page 10: Operation
If the product is dropped or the outer case is damaged, turn off the power switch and disconnect the power cord. Then contact Samsung Customer Do not lift or move the product by pulling the power cord or any cable. - Page 11 • Your eyesight may deteriorate. when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center. • Product failure, an electric shock or fire may result. Do not hold the product upside-down or move it by holding the stand.
- Page 12 Rest your eyes for more than 5 minutes for every 1 hour of product use. Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that •...
-
Page 13: Preparations
Chapter 02 Preparations Checking the Contents Remove the styrofoam from the product. Removing the Packaging (for LE32C and LE46C models only) ― The following images are for reference only. Real-life situations may differ from what is shown in the images. Remove the black locking device at the bottom of the box. -
Page 14: Removing The Packaging (For Le55C Models Only)
Removing the Packaging (for LE55C models only) Using the grooves in the box, lift and remove the top of the box. ― The following images are for reference only. Real-life situations may differ from what is shown in the images. -
Page 15: Checking The Components
Checking the Components Components - Contact the vendor where you purchased the product if any ― Components may differ in different locations. components are missing. - The appearance of the components and items sold separately may differ from the image shown. - A stand is not provided with the product. -
Page 16: Items Sold Separately
Items sold separately - The following items can be purchased at your nearest retailer. Wall-mount Kit Stand RS232C-Stereo cable (P.100) DVI cable (P.43) HDMI-DVI cable (P.43) HDMI cable (P.44) Video cable (P.47) Stereo cable (P.23) Component cable (P.48) RCA stereo cable (P.50) RCA cable (P.47) AV/Component Adapter (P.47) AUDIO Adapter (P.47) -
Page 17: Parts
Parts ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Buttons Description Control Panel Brightness Sensor (Optional) Automatically detects the surrounding brightness it accordingly. ― This function is activated only on the models equipped with an auto brightness sensor. -
Page 18: Rear View
Connects to MDC using an RS232C-stereo adapter. RS232C OUT IR OUT RJ45 MDC Connects to MDC using a LAN cable. LE32C RGB IN RJ45 MDC COMPONENT IN RGB/DVI/ RS232C HDMI/AV/ COMPONENT AUDIO LE46C, LE55C RGB/DVI RS232C RGB IN RJ45 MDC COMPONENT IN HDMI/ AV/ COMPONENT AUDIO... -
Page 19: Anti-Theft Lock
Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: Fix the cable of your anti-theft locking device to a heavy object such as a desk. -
Page 20: Remote Control
Remote Control ― Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. Power on the product. Power off the product. Enter the password in the OSD menu, or change the channel. - Page 21 TOOLS INFO Display information on the screen. Move to the upper, lower, left or right menu, or adjust an option's setting. Activates a highlighted menu item. RETURN EXIT Return to the previous menu. Exit the current menu. HDMI Manually select a connected input source from PC, DVI, or HDMI..
- Page 22 Remote Control Reception Range Adjusting the OSD with the Remote Control Buttons Description Open the OSD menu. Select from Input, Picture, Sound, Setup Multi Control in the displayed OSD menu screen. Change settings as desired. Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the left and right.
-
Page 23: Connection Using An Ir Stereo Cable (Sold Separately)
Connection Using an IR Stereo Cable (sold separately) Turn off the device before connecting the External Sensor Kit. After it is connected, turn on the device. Controlling more than one display product using IR OUT CONTROL IN your remote control •... -
Page 24: Before Installing The Product (Installation Guide)
Tilting Angle and Rotation 15 ˚ ― Contact Samsung Customer Service Center for further details. • The product can be tilted at a maximum angle of 15 from a perpendicular wall surface. • To use the product vertically (portrait), turn it clockwise so that the LED is pointing down. -
Page 25: Dimensions
Figure 1.3 Side view Installation on an Indented Wall ― Contact Samsung Customer Service Center for further details. Plane view Minimum 40 mm Minimum 70 mm Minimum 50 mm Minimum 50 mm Ambient temperature: Under 35 C ― When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35 C. -
Page 26: Installing The Wall Mount Kit
We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own. -
Page 27: Wall Mount Kit Specifications (Vesa)
Samsung is not liable for these kinds of accidents. • Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. -
Page 28: Remote Control (Rs232C)
Remote Control (RS232C) • Pin assignment 1 2 3 4 5 Cable Connection RS232C Cable Interface RS232C (9 pins) 6 7 8 9 TxD (No.2), RxD (No.3), GND (No.5) Signal Bit rate 9600 bps Detect data carrier Data bits 8 bit Received data Parity None... -
Page 29: Lan Cable
LAN Cable • RS232C cable Connector: 9-Pin D-Sub to Stereo Cable • Pin assignment 1 2 3 4 5 6 7 8 -P1- -P1- -P2- -P2- Female --------> STEREO <-------- PLUG Pin No Standard Colour Signal ---------- (3.5ø) White and orange Orange White and green Blue... - Page 30 Cross LAN cable (PC to PC) • Connector : RJ45 Direct LAN cable (PC to HUB) RJ45 RJ45 RJ45 MDC Signal Signal <--------> <--------> Signal Signal <--------> <--------> <--------> <--------> <--------> <-------->...
-
Page 31: Connection
Connection • Connection 2 • Connection 1 RJ45 RJ45 RS232C RS232C RS232C RS232C • Connection 3 RJ45 RS232C RS232C RS232C RS232C... -
Page 32: Control Codes
Command type Command Value range Control Codes Video Wall On 0x84 Viewing control state (Get control command) Video Wall User Control 0x89 Header Command Data length Checksum • All communications take place in hexadecimals. The checksum is calculated by adding up all 0xAA Command type values except the header. -
Page 33: Power Control
Power control Volume control • Function • Function A product can be powered on and off using a PC. The volume of a product can be adjusted using a PC. • Viewing power state (Get Power ON / OFF Status) •... - Page 34 Input source control 0x24 HDMI2_PC • Function 0x25 DisplayPort The input source of a product can be changed using a PC. ― DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to • Viewing input source state (Get Input Source Status) "Get"...
- Page 35 Screen mode control • Nak Header Command Data length Ack/Nak r-CMD Val1 Checksum • Function The screen mode of a product can be changed using a PC. 0xAA 0xFF 0x18 "ERR" Screen mode cannot be controlled when the Video Wall function is enabled.
- Page 36 PIP On/Off control Auto adjustment control (PC and BNC only) • Function • Function The PIP mode of a product can be turned on or off using a PC. Automatically adjust the PC system screen using a PC. ― Only available on models that have the PIP function. •...
- Page 37 Video Wall Mode Control Safety Lock • Function • Function Video Wall mode can be activated on a product using a PC. PC can be used to turn the Safety Lock function on or off on a product. This control is only available on a product whose Video Wall is enabled.
- Page 38 Video Wall On • Nak Header Command Data length Ack/Nak r-CMD Val1 Checksum • Function Turn Video Wall on or off on the product from your computer. 0xAA 0xFF 0x84 • Get Video Wall On/Off Status "ERR": A code showing what error has occurred Header Command Data length...
- Page 39 10x10 Video Wall Model 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x2F 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28...
- Page 40 10x10 Video Wall Model : ( 1 ~ 100) Set Number Data 0x01 0x02 0x63 0x64 • Ack Header Command Data length Ack/Nak r-CMD Val1 Val2 Checksum 0xAA 0xFF 0x89 Wall_Div Wall_SNo • Nak Header Command Data length Ack/Nak r-CMD Val1 Checksum 0xAA...
-
Page 41: Connecting And Using A Source Device
Chapter 03 Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Pre-connection Checkpoints Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. ―... -
Page 42: Connecting To A Pc
Connecting to a PC • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. • A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC. -
Page 43: Connection Using A Dvi Cable (Digital Type)
Connection using a DVI cable (Digital type) DVI IN RGB / DVI / HDMI / AV / COMPONENT / AUDIO IN Connection Using an HDMI-DVI Cable ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name DVI PC... -
Page 44: Connection Using An Hdmi Cable
Connection Using an HDMI Cable HDMI IN 1, HDMI IN 2... -
Page 45: Changing The Resolution
Changing the Resolution ― Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. ― The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display Settings, and change the resolution. -
Page 46: Changing The Resolution On Windows 7
Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution, and change the resolution. Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution, and change the resolution. -
Page 47: Connecting To A Video Device
Connecting to a Video Device • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. • You can connect a video device to the product using a cable. ―... -
Page 48: Connection Using The Component Cable
Connection Using the component Cable AV / COMPONENT IN RGB / DVI / HDMI / AV / COMPONENT / AUDIO IN Connection Using an HDMI-DVI Cable ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. -
Page 49: Connection Using An Hdmi Cable
Connection Using an HDMI Cable Using an HDMI cable or HDMI-DVI Cable (up to 1080p) • For better picture and audio quality, connect to a digital device using an HDMI cable. HDMI IN 1, HDMI IN 2 • An HDMI cable supports digital video and audio signals, and does not require an audio cable. -
Page 50: Connecting To An Audio System
Connecting to an Audio System ― Connecting parts may differ in different products. RGB / DVI / HDMI / AV / COMPONENT / AUDIO... -
Page 51: Connecting The Network Box (Sold Separately)
Connecting the network box (Sold separately) ― For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase. MagicInfo To use MagicInfo, a network box (sold separately) must be connected to the product. ―... - Page 52 Enter the IP information. MagicInfo Setup Wizard - v.1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: 192 . 168 . 0 . 102 Subnet mask: 255 . 255 . 255 . 0 Default gateway: 192 .
- Page 53 Select a display mode. MagicInfo Setup Wizard - v.1.12 Select Screen Type - step 4 Landscape Portrait < Back(B) Next(N) > Finish Cancel Double-check the settings you have just configured. MagicInfo Setup Wizard - v.1.12 ― If the execution icon does not appear, double-click the MagicInfo icon on the desktop.
-
Page 54: Input
Chapter 04 Input Source List Use to select PC, HDMI or other external input sources connected to the LCD Display. Use to select the screen of your choice. MENU Input Source List ENTER m : T Source List Source List ：---- ：---- ：----... -
Page 55: Pip
Turns the Screen Off/On. • ― PIP turns off when the LCD Display is switched to an external source. ― If you select in Size, Position Transparency will not be activated. ― The Video Wall is On. function is not available when ―... -
Page 56: Size
Size Changes the Size of the PIP window. ― Picture Size will be changed to 16:9when is On. > ：On Source ：HDMI 1 Size ：---- Position ：---- Transparency ：투명하게 Move Enter Return - The displayed image may differ depending on the model. Position Changes the Position of the PIP window. -
Page 57: Transparency
Transparency Adjusts the Transparency of PIP windows. High • Medium • • ：On Opaque Source ：HDMI 1 • Size ：---- Position ：---- Transparency ：투명하게 High Medium Opaque Move Enter Return - The displayed image may differ depending on the model. Edit Name Name the input device connected to the input jacks to make your input source selection easier. -
Page 58: Source Autoswitch Settings
Source AutoSwitch Settings When the Source AutoSwitch is On, the display video source will automatically be searched for active video. Primary Source selection will be activated, if the current video source is not recognized. Secondary Source selection will become active, if no primary video source is available. If the primary or secondary source is Source AutoSwitch not recognized, the display will search again, if no active video is found the display will show the no-input-signal message. -
Page 59: Primary Source
Primary Source Specify Primary Source for the automatic input source. Source AutoSwitch Settings Source AutoSwitch Settings Source AutoSwitch : On : On Primary Source Recovery Primary Source Secondary Source Move Enter Return - The displayed image may differ depending on the model. Secondary Source Specify Secondary Source... -
Page 60: Mode
Chapter 05 Picture PC / DVI / MagicInfo Mode Mode MENU Picture Mode ENTER m : T The LCD Display has four automatic picture settings ("Information", "Advertisement" and "Custom") that are preset at the factory. Picture Picture Information • Recommended for communicating exact information (e.g. public information). Mode ：사용자... -
Page 61: Custom
Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. ― By adjusting the picture using the Custom function, Mode will change to Custom mode. ― Not available when Dynamic Contrast is set to On. Custom Custom Contrast... -
Page 62: Color Tone
Color Tone The Color tones can be changed. ― Not available when Dynamic Contrast is set to On. Cool Normal Warm Custom • Picture Picture ― If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp. function is disabled. -
Page 63: Color Temp
Color Temp. Color Temp. is a measure of the 'warmth' of the image Colors. ― This function is enabled when Mode is set to Custom, and Dynamic Contrast Color Tone are Off. Color Temp. 10000K - The displayed image may differ depending on the model. Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and... -
Page 64: Auto Adjustment
Auto Adjustment The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. Auto Adjustment Please wait. - The displayed image may differ depending on the model. - Available in mode only. -
Page 65: Size
Size Size can be switched. 16:9 Original Ratio • Picture Picture More Signal Balance 16:9 Size HDMI Black Level : 일반 Original Ratio PIP Picture Dynamic Contrast : Off Lamp Control : 100 Brightness Sensor Picture Reset Move Enter Return - The displayed image may differ depending on the model. -
Page 66: Pip Picture
PIP Picture Adjusts the PIP Screen Settings. ― Available Modes: PIP On Contrast • PIP Picture PIP Picture Adjusts the Contrast of the PIP window on the screen. Brightness • Contrast Brightness Adjusts the Brightness of the PIP window on the screen. Sharpness Sharpness Color... -
Page 67: Lamp Control
Lamp Control Adjusts the inverter lamp in order to reduce energy consumption. ― Not available when Dynamic Contrast is set to On. Lamp Control - The displayed image may differ depending on the model. Brightness Sensor Brightness Sensor detects the ambient light intensity so that the picture brightness can automatically be adjusted. •... -
Page 68: Picture Reset
Picture Reset Reset the screen settings. Reset picture settings? - The displayed image may differ depending on the model. -
Page 69: Picture
Chapter 06 Picture AV / HDMI / TV / Component Mode Mode MENU Picture Mode ENTER m : T The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory. Picture Picture Dynamic •... -
Page 70: Custom
Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. ― Not available when Dynamic Contrast is set to On. Contrast Custom Custom Adjusts the Contrast. Contrast Brightness Sharpness Brightness Color Tint G 50 Adjusts the Brightness. -
Page 71: Color Tone
Color Tone The Color tones can be changed. The individual Color components are also user adjustable. ― Not available when Dynamic Contrast is set to On. Cool2 Cool1 Normal Warm1 Warm2 • Picture Picture ― If you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp. -
Page 72: Size
Size Size can be switched. 16:9 • Sets the picture to 16:9 wide mode. Size Size Zoom1 • Magnifies the size of the picture on the screen. 16:9 Zoom1 ▶ Zoom2 • Zoom2 ▶ Magnifies the size of the picture more than Zoom1. Screen Fit ▶... -
Page 73: Hdmi Black Level
HDMI Black Level When a DVD or set-top box is connected to your product via HDMI or DVI port, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. HDMI Black Level. -
Page 74: Pip Picture
PIP Picture Adjusts the PIP Screen Settings. Contrast • Adjusts the Contrast of the PIP window on the screen. PIP Picture PIP Picture Brightness • Adjusts the Brightness of the PIP window on the screen. Contrast Brightness Sharpness • Sharpness Adjusts the Sharpness of the PIP window on the screen. -
Page 75: Lamp Control
Lamp Control Adjusts the inverter lamp in order to reduce energy consumption. ― Not available when Dynamic Contrast is set to On. Lamp Control - The displayed image may differ depending on the model. Brightness Sensor Brightness Sensor detects the ambient light intensity so that the picture brightness can automatically be adjusted. •... -
Page 76: Picture Reset
Picture Reset Reset the screen settings. Reset picture settings? - The displayed image may differ depending on the model. -
Page 77: Sound
Chapter 07 Sound Mode MENU Sound Mode ENTER m : T The LCD Display has a built-in high fidelity stereo amplifier. Standard • Sound Sound Selects Standard for the standard factory settings. Standard Mode 사용자 조정 Music • Music Custom Music Selects when watching music videos or concerts. -
Page 78: Custom
Custom The sound settings can be adjusted to suit your personal preferences. ― You can hear the sound even when sound value is set to 0. ― If you adjust sound using Custom function, Mode will turn to Custom mode. Custom Custom Bass... -
Page 79: Srs Ts Xt
SRS TS XT SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround XT delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. •... -
Page 80: Speaker Select
Speaker Select When you use the product with it connecting to a Home Theater, turn the internal speakers off so you can listen to sound from the Home Theater's (external) speakers. Internal • Internal External Sound is outputted both from the speaker and the speakers, but the volume control is only available Sound... -
Page 81: Setup
Chapter 08 Setup Language MENU Setup Language ENTER m : T You can choose one of 14 languages. Setup Setup ― The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Language English 한국어... -
Page 82: Time
Time Selects from one of 4 time settings, Clock Set, Sleep Timer, Timer, and Holiday Management. Clock Set Time Time Current Time Setting. Sleep Timer 10:04 am ▶ Clock Set : Off ▶ Sleep Timer : Off ▶ Timer1 Turns the LCD Display off automatically at certain times. : Off ▶... -
Page 83: Menu Transparency
Menu Transparency Change the transparency of the background of the OSD. High Medium Opaque • Setup Setup Language : English Time Menu Transparency High 투명하게 Safety Lock Medium Energy Saving : 해제 Opaque Video Wall Safety Screen More Move Enter Return - The displayed image may differ depending on the model. -
Page 84: Energy Saving
Energy Saving This feature adjusts the power consumption of the unit in order to save energy. • Setup Setup Language : English Time Menu Transparency : High Safety Lock Energy Saving 해제 Video Wall Safety Screen More Move Enter Return - The displayed image may differ depending on the model. -
Page 85: Format
Format Format can be selected to see a divided screen. Full • Provides a full screen without any margins. Video Wall Video Wall Natural • : On Video Wall ▶ Displays a natural image with the original aspect ratio intact. : Full ... -
Page 86: Vertical
Vertical Sets how many parts the screen should be divided vertically. Fifteen adjustment levels: 1~15. ― If Video Wall Video Wall Horizontal is set to 15, the maximum value for Vertical is 6. : On Video Wall ▶ : Full ... -
Page 87: Safety Screen
Safety Screen Pixel Shift To prevent after-images on the screen, you can use this function to have pixels move on the LCD in the horizontal or vertical Pixel Shift direction. • Pixel Shift Pixel Shift Horizontal Pixel Shift : On ... -
Page 88: Timer
Timer Timer You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be Timer Timer performed for the set period of time and then automatically finish. : On Timer ▶... -
Page 89: Eraser
Eraser This function prevents after-images on the screen by moving a rectangular pattern. - The displayed image may differ depending on the model. Pixel This function prevents after-images by moving many pixels on the screen. - The displayed image may differ depending on the model. -
Page 90: Side Gray
Side Gray Select the brightness of the grey for the screen background. Light Dark • Safety Screen Safety Screen Pixel Shift Timer Eraser Pixel Side Gray Light Dark Move Enter Return - The displayed image may differ depending on the model. Resolution Select When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024... -
Page 91: Power On Adjustment
Power On Adjustment Adjusts the Power On time for the screen. ― Set the Power On time to be longer to avoid overvoltage. Power On Adjustment Power On Adjustment Power On Adjustment Adjust Return - The displayed image may differ depending on the model. OSD Rotation OSD Rotate Landscape... -
Page 92: Advanced Settings
Advanced Settings Temperature Configures the setting for the Temperature function, which detects the internal temperature for the product's protection. Advanced Settings Advanced Settings Temperature Control ▶ Temperature Detects the product's internal temperature and specifies the desired temperature. Auto Power : Off ▶... -
Page 93: Button Lock
Button Lock Locks or unlocks the monitor control buttons on the product. • Advanced Settings Advanced Settings Temperature Auto Power : Off Button Lock User Auto Color Standby Control : Auto Lamp Schedule OSD Display Software Upgrade Move Enter Return - The displayed image may differ depending on the model. -
Page 94: Standby Control
Standby Control Sets the standby mode, which will be activated when no input signal is detected. • A message will read No Signal if no input signal is detected. Advanced Settings Advanced Settings • Temperature Power-saving mode will be activated if no input signal is detected. Auto Power : Off Button Lock... -
Page 95: Osd Display
OSD Display Displays or hides a menu item on the screen. Source OSD OSD Display OSD Display • Source OSD : On ▶ : On ▶ Not Optimum Mode OSD : On No Signal OSD ▶ Not Optimum Mode OSD : On ... -
Page 96: Software Upgrade
Software Upgrade Performs a software upgrade. Connect the product to a computer via a digital signal such as DVI or HDMI. Click the BMP image file converted from an SW code. The image below will appear on the screen of the product. While a BMP image onto which the software code has been converted is displayed on the screen, select Software Upgrade. -
Page 97: Setup Reset
Setup Reset Reset all the values for a setting. Reset settings in setup? - The displayed image may differ depending on the model. Reset All Reset all the settings for the display. All Settings return to default settings. - The displayed image may differ depending on the model. -
Page 98: Using Mdc
Chapter 09 Using MDC MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC. Multi Control ID Setup • Assigns distinctive IDs to the SET. ID Input • MENU m : T Multi Control ENTER Use to select the transmitter functions of the individual SET. -
Page 99: Mdc Program Installation/Uninstallation
MDC Program Installation/Uninstallation Installation MDC installation can be affected by the Insert the installation CD into the CD-ROM drive. graphics card, mother board and network conditions. Click the MDC Unified installation program. Select a language for installation. Next, click "OK". If a software installation window is not displayed on the main screen, install with When the... -
Page 100: What Is Mdc
What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices Connecting to MDC simultaneously using a PC. Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. Monitor 1 RS232C IN Monitor 2... -
Page 101: Using Mdc Via Ethernet
Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 MDC port on the product and the LAN ports on the HUB. Monitor 1 RJ45 MDC Monitor 2... - Page 102 Connection using a cross LAN cable ― Multiple products can be connected using the RS232C IN / OUT port on the product. RS232C IN Monitor 1 RS232C OUT RJ45 MDC RS232C OUT RS232C IN Monitor 2 Computer...
-
Page 103: Connection Management
Connection Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion. -
Page 104: User Login
User Login Launching the program displays the user login window. The initial login ID (Username: admin) and password (password: admin) are set to admin. ― After logging in for the first time, make sure to change the password to ensure security. ―... -
Page 105: Auto Set Id
Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 to 99, and then finally to Set ID 0. ―... -
Page 106: Cloning
Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window. ― To delete the settings you have configured, click the Paste Settings button. -
Page 107: Command Retry
Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10. -
Page 108: Getting Started With Mdc
Getting Started with MDC To start the program, click Start Programs Samsung MDC Unified. The login window appears after the MDC program is launched. Enter the user ID and password. • The default user ID and password are admin. • Make sure to change the password after the first login. -
Page 109: Main Screen Layout
Main Screen Layout Change the status of a display device or the properties of the program. Menu Bar View a list of connected display devices or device groups. Device Category View a list of schedules for display devices. Schedule Category Select the display device you want to adjust. - Page 110 ― The volume can be changed or the sound can be muted only for displays that are turned on. Volume Volume • Adjust the volume of a selected display. • The volume can be adjusted using the slider bar in the range of 0 to 100. Mute •...
-
Page 111: Screen Adjustment
User Login User Settings • Add, delete or edit login information. Logout • Log out from the current user account as follows. • Click Logout. The message "Do you want to log admin out?" is displayed • Click Yes. The user login window appears. •... - Page 112 Color Color • Adjust the colors for the selected display device. Tint (G/R) • Adjust the tint for the selected display device. Color Tone • Adjust the background color tone for the selected display device. Color Temp. • Adjust the color temperature for the selected display device. ―...
- Page 113 MPEG Noise Filter Reduces MPEG noise to provide improved picture quality. Medium High Auto • Smart LED Controls the LED backlight to maximize picture clarity. Cinema Black In Movie mode, this feature dims the top and bottom areas of the video image to provide a more immersive viewing experience.
-
Page 114: Advanced Features
Advanced features 3D Mode Select the 3D input format. 3D L/R Change Swap the left and right pictures. Displays the image for the left eye only. 3D Auto View 3D Control 3D Auto View Message Notice, a pop up message window appears when the product receives a 3D signal. If you set 3D Optimization The overall adjustment of 3D effect. - Page 115 Advanced Settings Dynamic Contrast Adjust the screen contrast. Gamma Control Adjust the primary color intensity. RGB Only Mode Displays the Red, Green Blue color for making fine adjustments to the hue and saturation. Flesh Tone Emphasize pink “Flesh Tone. ” Motion Lighting Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
-
Page 116: Sound Adjustment
Sound Adjustment You can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. Bass • Adjust the bass for the selected display. Treble • Adjust the treble for the selected display. Balance(L/R) Bass Treble - The... - Page 117 Format • Select the number of horizontal display devices. • Select the format to display the split screen. • A maximum of 15 displays can be arranged in a row. ― A maximum of 6 can be assigned to if 15 is assigned to H. •...
- Page 118 General User Auto Color • Automatically adjust the screen colors. ― Available only in mode. Auto Power • Set the product to automatically power on. Standby Control • Set the standby mode to activate if an input source is not detected. Fan &...
- Page 119 Security Safety Lock • Lock the on-screen menus. ― To unlock the menus, set Safety Lock to Off. Button Lock • Lock the buttons on the display device. ― To unlock the buttons, set Button Lock to Off. OSD Display Source OSD •...
- Page 120 Time Clock Set Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer On Timer • Repeat: Specify the period for which you want to repeat the selected Timer. Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual Holiday...
-
Page 121: Screen Burn Protection
Holiday Management Holiday Management allows you to prevent devices that are set to be powered on by the Timer from turning on at a specified date. ― The Holiday Management function can be enabled or disabled in the Timer settings menu. •... - Page 122 Screen Saver This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Timer: You can set the timer for Screen Saver. • • Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals (Period).
- Page 123 Safety Screen Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time.
- Page 124 Ticker Input text while a video or image is displayed and display the text on the screen. Ticker Enable or disable Ticker. • Message Enter a message to display on the screen. Timer Start Time End Time Set the to display a message (Message). Position Horizontal and Vertical.
-
Page 125: Tool Settings
Tool Settings Panel Control: Turn on or off the screen of a display device. • Remote Control: Enable or disable the remote control. • Security Reset Reset Picture: Reset the screen settings. • Reset Sound: Reset the sound settings. • Reset System: Reset the system settings. -
Page 126: Edit Column
Edit Column Configure the settings for the items that will be displayed on the list of displays. • Language: Select a language to use in the MDC program. After selecting a language, restart the MDC program to use the selected language. Options Command Retry Count: Specify the number of retry attempts when a command fails. - Page 127 Monitor Window A window appears showing details for data transfer between the computer and display devices. Filter • Information View the program information.
-
Page 128: Other Functions
Other Functions Resizing a Window Place the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to customize the size of the program window. -
Page 129: Group Management
Group Management Create groups and manage the list of sets on a group basis. ― Duplicate group names cannot be used. Group Edit Creating Groups Right-click and select in the display device list section on the left side of the program window. In the Edit Group window displayed, click... - Page 130 Add on the sub level: Create a sub-group under the selected group. • Enter the group name. Deleting Groups Select a group name, and click Edit. In the Edit Group window displayed, click Delete. Click Yes. The group will be deleted.
-
Page 131: Schedule Management
Renaming Groups Select a group name, and click Edit. Edit Group window displayed, click Rename. In the If a cursor appears in the old group name, enter a new group name. Rename Schedule Management Creating Schedules Create and register a schedule on a group basis. All Schedule List Click in the schedule section on the left side of the program window. - Page 132 Click the button. The Add Schedule window will appear. Device Group Click below the item, and select the group you want to add a schedule to. Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list window.
-
Page 133: Troubleshooting Guide
Troubleshooting Guide - This program may malfunction sometimes due to a communication Issue Solution problem between the PC and display or electromagnetic waves emitted from The display you want to control does not Check the connection of the RS232C cable (check that the cable is properly connected to appropriate serial port). nearby electronic devices. - Page 134 How display properties are shown when multiple displays are used When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3. When the All+Select checkbox is checked and all displays are selected: The default settings are displayed.
-
Page 135: Requirements Before Contacting Samsung Customer Service Center
Chapter 10 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Testing the Product Center, test your product as follows. If the problem persists, contact Samsung Check if your product is operating normally by using the product test function. -
Page 136: Check The Followings
Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when The blank spaces found on the screen have nothing to do with the product. - Page 137 Screen issue The screen appears unstable and shaky. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product. Then, change the screen settings if required by referring to the Additional Information on the product menu and the Standard Signal Mode Table.
- Page 138 Remote control issue The remote control does not work. Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failure. Make sure that the power cord is connected. Check for any special lighting or neon signs switched on in the vicinity. Source device issue A beeping sound is heard when my PC is booting.
-
Page 139: Q & A
Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to Control Panel Appearance and Themes Display Settings Advanced Monitor and adjust the frequency in Monitor Settings. • Windows ME/2000: Go to Control Panel Display Settings Advanced... - Page 140 Question Answer How do I set powersaving mode? • Windows XP: Set power-saving mode in Control Panel Appearance and Themes Display Screen Saver Settings or BIOS SETUP on the PC. • Windows ME/2000: Set power-saving mode in Control Panel Display Screen Saver Settings or BIOS SETUP on the PC.
-
Page 141: Specifications
Chapter 11 Specifications General Size Model Name LE32C LE46C LE55C Panel Size 32 Class (32 inches / 80.5 cm) 46 Class (45.9 inches / 116 cm) 55 Class (54.6 inches / 138 cm) Display area 698.4 mm (H) x 392.85 mm (V) 1018.08 mm (H) x 572.67 mm (V) - Page 142 Model Name LE32C LE46C LE55C Resolution Optimum 1920 x 1080 @ 60 Hz resolution Maximum 1920 x 1080 @ 60 Hz resolution Power Supply This product uses 100 to 240V. Refer to the label at the back of the product as the standard voltage can vary in different countries.
- Page 143 [Recommendation] - EU Only • Hereby, Samsung Electronics, declares that this Monitor is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. • The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
-
Page 144: Powersaver
PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power- savign mode only functions when the product is connected to a PC with a power-saving function. - Page 145 LE55C PowerSaver Normal Operation Power saving mode Power off (Power Button off) Rating Typical Without PIM With PIM Power Indicator On (Green) Blinking On (Orange) Power Consumption 140 W 200 W 123 W Lower than 0.5 W Lower than 0.5 W ―...
-
Page 146: Preset Timing Modes
Preset Timing Modes ― This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product. - Page 147 Resolution Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity (kHz) (Hz) (MHz) (H/V) - Horizontal Frequency VESA, 1024 x 768 60,023 75,029 78,750 The time to scan one line connecting the right edge to the left edge of the screen VESA, 1152 x 864 67,500 75,000...
-
Page 148: Appendix
Chapter 12 Appendix Contact SAMSUNG WORLD WIDE ― If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com... - Page 149 LATIN AMERICA COSTA RICA 0-800-507-7267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) DOMINICA 1-800-751-2676 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) ECUADOR 1-800-10-7267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) EL SALVADOR 800-6225 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) GUATEMALA 1-800-299-0013 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) HONDURAS 800-27919267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English)
- Page 150 8009 4000 only from landline http://www.samsung.com (+30) 210 6897691 from mobile and land line CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 DENMARK 70 70 19 70 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com...
- Page 151 TOLL FREE No. SERBIA 0700 SAMSUNG (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.com/ch (German) http://www.samsung.com/ch_fr (French)
- Page 152 MOLDOVA 0-800-614-40 http://www.samsung.com MONGOLIA +7-800-555-55-55 http://www.samsung.com RUSSIA 8-800-555-55-55 http://www.samsung.com TADJIKISTAN 8-10-800-500-55-500 http://www.samsung.com UKRAINE 0-800-502-000 http://www.samsung.com/ua (Ukrainian) http://www.samsung.com/ua_ru (Russian) UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698-4698 http://www.samsung.com/hk (Chinese) http://www.samsung.com/hk_en (English)
- Page 153 1800 266 8282 INDONESIA 0800-112-8888 http://www.samsung.com 021-5699-7777 JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) for PLDT http://www.samsung.com 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com TAIWAN 0800-329-999 http://www.samsung.com...
- Page 154 MIDDLE EAST BAHRAIN 8000-4726 http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) EGYPT 08000-726786 http://www.samsung.com IRAN 021-8255 http://www.samsung.com JORDAN 800-22273 http://www.samsung.com 065777444 KUWAIT 183-2255 http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) MOROCCO 080 100 2255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic)
- Page 155 AFRICA GHANA 0800-10077 http://www.samsung.com 0302-200077 KENYA 0800 545 545 http://www.samsung.com NAMIBIA 8197267864 http://www.samsung.com NIGERIA 0800-726-7864 http://www.samsung.com SENEGAL 800-00-0077 http://www.samsung.com SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung.com TANZANIA 0685 88 99 00 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com ZAMBIA 211350370 http://www.samsung.com...
-
Page 156: Responsibility For The Pay Service (Cost To Customers)
― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. • Use of supplies or separatly sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. -
Page 157: Correct Disposal
Correct Disposal Correct Disposal of This Product Correct disposal of batteries in this product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) The marking on the battery, manual or packaging indicates that the battery in this (Applicable in countries with separate collection systems) product should not be disposed of with other household waste. -
Page 158: Optimum Picture Quality And Afterimage Burn-In Prevention
Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality • To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. - Resolution: 1920 x 1080 @ 60 Hz - Vertical frequency (refresh rate): 58 ~ 85 Hz Screen refresh rate: refers to the number of times a display image is refreshed per second. -
Page 159: Prevention Of Afterimage Burn-In
Prevention of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight Black Matrix Color-Filter Common... - Page 160 • Avoid combinations of a text color and background color of contrasting brightness. ― Avoid using grey as it may contribute to afterimage burn-in. ― Avoid using colors of contrasting brightness (black and white; grey). *Brightness: refers to the lightness or darkness of a color which varies TIME TIME...
-
Page 161: License
License Manufactured under license from Dolby Laboratories. DivX Certified Ⓡ to play DivX Ⓡ video up to HD 1080p, including premium content. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DivXⓇ, DivX CertifiedⓇ and associated logos are trademarks of DivX, Inc. and are used under license. -
Page 162: Terminology
Terminology 480i / 480p / 720p / 1080i / Non-interlace Mode and Interlace Vertical Frequency____ The product Component ports (green, blue and DVD (Digital Versatile Disc)____ DVD 1080p____ Each of the scanning Mode____ Non-interlace mode displays a single image many times red)____ The component ports, which refers to a CD-sized mass storage disk rates above refers to the number of...