Product Specifications - Philips HTL9100 User Manual

6 Product
specifications
Note
•
Specifications and design are subject to change without
notice.
Amplifier
• Total output power: 210W RMS (+/- 0.5
dB, 30% THD) / 168W RMS (+/- 0.5 dB,
10% THD)
• Frequency response: 20 Hz-20 kHz / ±3
dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 400 mV
• AUDIO-IN: 220 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Bluetooth
• Bluetooth profiles: A2DP
•
Bluetooth version: 2.1 + EDR
Main unit
•
Power supply: 110-240 V~, 50/60 Hz
• Power consumption: 50 W
•
Standby power consumption: ≤ 0.5 W
• Speaker impedance:
• Woofer: 8 ohm
• tweeter: 8 ohm
• Speaker drivers: 2 x 63.5 mm (2.5") woofer
+ 2 x 25.4 mm (1") tweeter
•
Dimensions (WxHxD):
1035 x 73 x 156 mm (with 2 surround
speakers attached)
•
Weight: 3.9 kg
Surround speakers
• Speaker impedance: 8 ohm
• Speaker drivers: 2 x 63.5 mm (2.5") full
range
• Dimensions (WxHxD):
191 x 73 x 156 mm
• Weight: 0.7 kg/each
Subwoofer
• Power supply: 110-240 V~, 50/60 Hz
• Power consumption: 30 W
• Standby power consumption: ≤ 0.5 W
• Impedance: 4 ohm
• Speaker drivers: 1 x 165 mm (6.5") woofer
• Dimensions (WxHxD):
200 x 510 x 201 mm
• Weight: 4.9 kg
Wall mount
• Dimensions (WxHxD):
40 x 100 x 26.5 mm
•
Weight: 0.1 kg/each
Remote control batteries
• 2 x AAA-R03-1.5 V
EN
15