Table of Contents
Advertisement
8 electrolux
Sliding rails installation
Position each rail on the side of the
cabinet. Please note that there is a
specific sliding rail for each side of the
cabinet.
Each sliding rail should be flush with the
support brackets, with spacers when
present and with the front of the cabinet.
1
Spacer
2
Sliding rail
3
Support bracket
Pull out the sliding rail until the cabinet
underneath becomes visible.
Fix the sliding rail, the support bracket and
the spacer with the provided self-threading
screws 4.5x16.
When extracting the sliding rails, only
one of the frontal holes will become
visible. After mounting the
corresponding screw, move the rail
again to see the second hole and
mount the corresponding screw.
Positioning in the kitchen cabinet
Pull the sliding rails completely out, and
place the Refreshment Centre on them
making sure that the conical pivots match
the holes on the base.
Fix the Refreshment Centre on the bottom
side of the sliding rails with the 2 provided
M4x12 screws.
Push back the Refreshment Centre, until it
is locked into position.
Check aesthetic alignment with the
cabinet and use the provided circular
spacers M6x12 for final adjustment.
Advertisement
Table of Contents
