2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Important safety information Cleaning and maintenance Environment What to do if ... Product description Technical data Control panel Machine settings Before first use Hints for test institutes Programme chart Installation Sorting and preparing laundry...
Page 3
electrolux 3 • Please make sure that no gas lighters or • Only dry fabrics which are designed to be matches have accidentally been left in machine dried. Follow the instructions on pockets of garments to be loaded into ap- each garment label.
4 electrolux Environment components are identified by markings, e.g. The symbol on the product or on its >PE<, >PS<, etc. Please dispose of the packaging indicates that this product may packaging materials in the appropriate con- not be treated as household waste. Instead tainer at the community waste disposal fa- it should be taken to the appropriate cilities.
electrolux 5 Product description Control panel Drawer with condensed water container Fluff filters Push button for base door opening Loading door (reversible) Rating Plate Ventilation grille Heat exchanger Adjustable feet Heat exchanger door...
6 electrolux Control panel Programme knob and On/Off switch Indicator lights DELAY TIMER button Function buttons START/PAUSE button Before first use In order to remove any residues which may 1. Turn the programme knob to TIME have been produced during production, wipe (TIME) .
electrolux 7 Programme Application/properties For thin fabrics which are not ironed, e.g. easy care shirts, Cupboard 3 kg table linen, baby clothes, socks, lingerie with bones or wires. (Cupboard) For thin fabrics which are also to be ironed, e.g. knitwear, 3 kg Iron (Iron) cotton shirts.
8 electrolux • Turn items with double-layered fabrics in- Type of laun- Weight side out (e.g. with cotton-lined anoraks, the cotton layer should be outermost). Towelling tow- 200 g These fabrics will then dry better. Important! Do not overload the appliance. Tea cloth 100 g Observe max.
Page 9
electrolux 9 Press the button until the light relevant to the desired delay lights up. This option must be selected after having selected the pro- gramme and before 3 6 9 pressing START/ PAUSE (START/PAUSE) to start the pro- gramme. The machine begins the countdown, which is shown by the pilot lights.
10 electrolux Putting in extra items or taking items out phase which lasts around 30 minutes. The drum rotates at intervals during this before end of programme phase. This keeps the laundry loose and 1. Open loading door. free of creases. The laundry can be re- Warning! Laundry and drum can moved at any time during the anti- become hot.
Page 11
electrolux 11 3. Refit water reservoir. If the programme has been interrupted as a result of the water reservoir being full: Press the START/PAUSE button to con- Clean the door seal tinue the drying cycle. Wipe the door seal with a damp cloth imme- diately after the drying cycle has finished.
12 electrolux 6. To empty the heat exchanger, hold verti- cally over a washing-up bowl. Caution! Do not use sharp objects to clean. The heat exchanger could develop leaks. 7. Clean heat exchanger. It is best to use a brush or to rinse thor- oughly with a hand-held shower.
electrolux 13 Have you pressed the START/ Press the START/PAUSE (START/ PAUSE (START/PAUSE) button? PAUSE) button again. Select a different programme the Drying results unsatisfac- Wrong programme selected. next time you dry (see “Programme tory. overview” chapter). Lint filters clogged. Clean lint filters.
14 electrolux Technical data This appliance conforms with the following EU Directives: – 2006/95/EC dated 12.12.2006 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Height x width x depth 85 x 60 x 58 cm Drum volume 108 l...
electrolux 15 Water hardness 1. Turn the programme selector to any programme. Water contains, a variable 2. Press simultaneously the DRYNESS and START/PAUSE but- quantity of limestone and min- tons and hold down for approx. 5 seconds: eral salts of which quantities –...
Page 16
16 electrolux Important! The appliance must not be Should the appliance power supply installed behind the lockable door, a sliding cable need to be replaced, this must door a door with a hinge on the opposite side be carried out by an authorised serv- to that of the appliance.
electrolux 17 Permanent connection Intermediate installation kits for stacked washer and iron aid appliance: In the case of permanent connection it is These intermediate installation kits can be necessary that you install a double pole used to arrange the iron aid appliance and an switch between the appliance and the elec- automatic Electrolux washing machine tricity supply (mains), with a minimum gap of...