Related Manuals for Electrolux ESF473
Summary of Contents for Electrolux ESF473
- Page 1 D i s h w a s h e r M o s o g a t ó g é p L a v a s t o v i g l i e INSTRUCTION BOOK HASZNÁLATI UTASÍTÁS LIBRETTO ISTRUZIONI Model ESF 473 152989 73/0 0/0798...
-
Page 2: Table Of Contents
Contents For the user For the installer Guide to use the instruction book Installation instruction Technical specifications Important safety information Water supply connections Description of the appliance Water outlet connection The control panel Electrical connection Before use Building-in Setting the water softener Adjusting the worktop Rinse aid Fitting under a counter... -
Page 3: Important Safety Information
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. -
Page 4: Description Of The Appliance
Description of the appliance IN60 1. Water hardness adjustment 8. Control panel 2. Levelling spacers 9. Central filters 3. Upper basket stop 10. Lower spray arm 4. Large filter 11. Upper spray arm 5. Salt container 12. Water inlet funnel 6. -
Page 5: The Control Panel
The control panel 1. On/Off indicator light 5. Programme sequence indicator As the programme progresses, the sequence 2. On/Off pushbutton indicator turns, to show the phase in the wash programme the appliance has reached. By depressing this button the machine starts Prewash / Rinse and Hold operating and, at the same time the On/Off indicator light illuminates. -
Page 6: Before Use
Before use Before using your dishwasher for the first time: 1 ensure that the electrical and water connections comply with the installation instructions 2 remove all packaging from inside the appliance 3 set the water softener 4 fill the salt container 5 fill the rinse aid dispenser. -
Page 7: Filling With Salt
Filling with salt If your water is "level 1" it is already soft and therefore there is no need to use salt. Salt must be used from "level 2" upward. Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in dishwasher, specially table salt, will damage the water softener. -
Page 8: Rinse Aid
Rinse aid Rinse aid is automatically added during the last rinse, ensuring through rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. -
Page 9: Use Of Detergent
Use of detergent Only use detergents specifically designed for use in dishwashers. To fill the dishwasher with detergent proceed as follows: 1. Open the dispenser lid by pulling the catch (D). 2. Add the detergent according to the recommendations in the programme chart. As all detergents are not the same, you should also consult the instructions on the packet specially for tablets. -
Page 10: Using Your Appliance
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. -
Page 11: Adjusting The Height Of The Upper Basket
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses; Glasses with long stems can be placed upside down in the raised cup racks. Larger plates (dinner plates up to 24 cm in diameter) must be loaded in the front part of the upper basket. -
Page 12: Hints And Tips
Hints and tips To save energy Items not suitable for dishwashers: The following items should not be washed in Place dishes in the machine immediately after the dishwasher (unless they are sold as every meal and wait until the dishwasher is full dishwasher proof): before washing. -
Page 13: Washing Programmes
Washing programmes Recommended quantity Programme Starting required Cycle Degree of soil of detergent and type of load position of the pushbuttons description on the in the programmer dispenser dispenser Hot prewash Heavy soil. Intensive 70°C Main wash up to 70°C 20 g 10 g Crockery, cutlery... -
Page 14: Operating Sequence
Operating sequence Check the filters At the end of the washing Ensure they are clean and properly programme positioned (see cleaning instructions). At the end of the washing programme the machine stops automatically. Check that there is rinse aid The On/Off indicator light remains on until the On/Off button is depressed. -
Page 15: Maintenance And Cleaning
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend you carry out a maintenance wash every three months, by running a 65°C programme without dishes using detergent. -
Page 16: External Cleaning
External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc..). Prolonged periods of non-operation If you are not using the machine for any period of time you are advised to: 1. -
Page 17: Something Not Working
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Symptom Solution The machine will not start The door has not been properly closed. -
Page 18: Service And Spare Parts
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Prod.No. -
Page 19: Installation Instruction
Installation instruction Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Technical specifications DIMENSIONS Width... -
Page 20: Water Supply Connections
Water supply connections This dishwasher may be fed with either hot (max. 60°C) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot. -
Page 21: Water Outlet Connection
Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. Hooked over the edge of the sink using the special curved plastic guide provided. -
Page 22: Building-In
Adjusting the worktop You can move the worktop forward or backward by 25 mm in order to align the machine with other kitchen units. Simply unscrew the two front retaining screws, move the top to the required position and then retighten the screws.