3.2 Rear Panel ........................3-2 4 Working States of the EC2108E STB ..............4-1 5 Remote Control ..................... 5-1 6 How to Use the EC2108E STB for the First Time ..........6-1 6.1 Connecting Cables ....................... 6-1 6.2 Starting the EC2108E STB ..................6-2 7 Common Operations ....................
Page 3
Figures Figure 3-1 Front panel of the EC2108E STB ..............3-1 Figure 3-2 Uncovered front panel of the EC2108E STB ..........3-2 Figure 3-3 Rear panel of the EC2108E STB ..............3-2 Figure 3-4 Right-Side Panel of the EC2108E STB ............3-3 Figure 4-1 Switching between the states ................
1 Product Overview Product Overview Thank you for choosing the EC2108E IP Set Top Box (hereinafter referred to as the EC2108E STB), which will bring you a brand-new entertainment experience. The EC2108E STB is a digital information electronic device provided for household subscribers.
EC2108E STB User Guide 2 Product Features Product Features The EC2108E STB has the following features: High reliability and stability Support for three access modes: PPPoE, DHCP, and static IP address Easy-to-use remote control Simple menus, which facilitate operations ...
IR indicator When the EC2108E STB is receiving signals from the remote control, the indicator blinks. The working status of the EC2108E STB is displayed on the Monitor LED monitor. Figure 3-2 shows the uncovered front panel of the EC2108E STB.
You can press the key to confirm an operation. 3.2 Rear Panel Figure 3-3 shows the rear panel of the EC2108E STB. Figure 3-4 shows the right-side panel of the EC2108E STB. Figure 3-3 Rear panel of the EC2108E STB...
EC2108E STB User Guide 3 Appearance Figure 3-4 Right-Side Panel of the EC2108E STB Name Description RJ45 It is the 10/100 Mbit/s Base-T Ethernet port. It is connected to Y, Pb, and Pr They are connected to the Y, Pb, and Pr input ports of a TV set.
The EC2108E STB is starting after being powered on. Standby When the EC2108E STB is working, press the Power button (blue button) on the remote control to change the status of the EC2108E STB to standby. The video output of the EC2108E STB is disabled.
Page 19
EC2108E STB User Guide 5 Remote Control Table 5-1 Functions of the buttons on the remote control of the EC2108E STB Name Function Power Shifts a TV set between the working state and the standby state. (Blue button) Scan Studies the functions of the remote control of a TV set.
6 How to Use the EC2108E STB for the First Time How to Use the EC2108E STB for the First Time This chapter describes how to connect cables and configure the EC2108E STB when the EC2108E STB is used for the first time. 6.1 Connecting Cables Connect the cables of the EC2108E STB according to Figure 6-1.
STB to the TV set in step 1. Use a Y, Pb, and Pr cable to connect the Y, Pb, and Pr ports of the EC2108E STB to the Y, Pb, and Pr input ports of the TV set.
User Guide 7 Common Operations Common Operations The chapter describes the common operations of the EC2108E STB. All the operations described in this user guide are performed through the remote control of the EC2108E STB, unless otherwise specified. 7.1 Adjusting the Audio Output 7.1.1 Switching Between Audio Channels or Between Audio...
Step 1 When the EC2108E STB is in the working state, press the Power button on the front panel or press the Power (Blue) button on the remote control to switch it to the standby state.
Keep the EC2108E STB far away from water sources. Do not place any container that is filled with liquid on the EC2108E STB. It is normal that the top cover and rear panel of the EC2108E STB become hot after you use it for a long time. ...
The audio cable is not properly connected. The TV set or the EC2108E STB is in mute mode or the volume is very low. Solutions: Check whether the audio cable is properly connected. For details, see 6.1 Connecting Cables.
Page 28
The video cable is in poor quality or is not properly connected. The TV standard of the TV set does not match the TV standard set on the EC2108E STB. The default output TV standard of the EC2108E STB is PAL.