Factory Reset - D-Link DPH-300S User Manual

Installation
In order to accomplish a Factory Reset of the DPH-300S, it is necessary to do the following:
1) Remove the handset from the base station.
2) Place the base station face-down on a flat surface (such as a table or desk top).
3) Insert a bent paperclip or a toothpick in the hole for the Factory Reset Button (see the photo on page 7 for the button's location), and hold the
button down.
4) While still holding the button down, unplug the power adapter.
5) Wait 10 seconds, then reconnect the power adapter without letting go of the Factory Reset Button.
6) Once you have restored power, continue holding the Factory Reset Button down for another 10 seconds.
7) Complete! The DPH-300S should have had the following factory default settings restored: IP Address; Call Logs (all).
8) Note that if your DPH-300S is still connected to the Internet, the auto-provisioning process should repeat itself after the factory reset, and the
phone should return to a ready-state showing "D-Link" in the handset display and allowing IP calling.
If you need to reset the handset to its original factory default settings, see page 19, HS Setting > Set Default.
D-Link DPH-300S User Manual

Factory Reset

11