Webcamera Module - HP 3115m Maintenance And Service Manual

7. Detach the adhesive strip (3) that secures the display panel cable to the display panel.
8. Disconnect the display panel cable (4) from the display panel.
9. Remove the display panel.
Reverse this procedure to install the display bezel and panel.

Webcamera module

Description
Webcamera module
Before removing the webcamera module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the display bezel (see
6. Remove the display panel (see
Remove the webcamera module:
1. Release the webcamera module (1) from the display enclosure. (The webcamera module is
attached to the display enclosure with double-sided tape)
36 Chapter 4 Removal and replacement procedures
Battery on page 33).
Display panel on page
Display panel on page
Spare part number
659516-001
35).
35).