Related Manuals for Electrolux EW 1067 F
Summary of Contents for Electrolux EW 1067 F
- Page 1 132997230•gb 19-04-2001 15:24 Pagina 1 W A S H I N G M AC H I N E P R A L N I S T R O J P E R I L I C A R U B L J A NAVODILA ZA UPORABO UPUTE ZA UPORABU MANUAL DE UTILIZARE...
- Page 2 132997230•gb 19-04-2001 15:24 Pagina 2 Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages When unpacking the appliance, check that it is not damaged.
-
Page 3: Table Of Contents
132997230•gb 19-04-2001 15:24 Pagina 3 Contents Warnings Maintenance Bodywork Disposal Detergent dispenser drawer Drain filter Tips for environmental protection 5 Water inlet filter Emergency emptying out Technical specifications Frost precautions Installation Something not working? 24-25 Unpacking Positioning Water inlet Water drainage Electrical connection Your new washing machine Description of the appliance... -
Page 4: Warnings
132997230•gb 19-04-2001 15:24 Pagina 4 Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation • Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door •... -
Page 5: Disposal
132997230•gb 19-04-2001 15:24 Pagina 5 Child safety • Keep all detergents in a safe place out of children’s reach. • Children are often not aware of how dangerous • Make sure that children or pets do not climb into electrical appliances can be. When the machine is the drum. -
Page 6: Technical Specifications
132997230•gb 19-04-2001 15:24 Pagina 6 Technical specifications DIMENSIONS Height 85 cm Width 60 cm Depth 58 cm MAXIMUM LOAD Cotton 5.5 kg Synthetics 2.5 kg Delicates 2.5 kg Woollens SPIN SPEED 1000 rpm max. (EW 1067F) 1200 rpm max. (EW 1267F) POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz TOTAL POWER ABSORBED... -
Page 7: Installation
132997230•gb 19-04-2001 15:24 Pagina 7 Installation Unpacking Positioning Install the machine on a flat hard floor. All transit bolts and packing must be removed Make sure that air circulation around the machine is before using the appliance. not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen You are advised to keep all transit devices so that units. -
Page 8: Water Drainage
132997230•gb 19-04-2001 15:24 Pagina 8 Water drainage Electrical connection The end of the drain hose can be positioned in three This machine is designed to operate on a 220-230 V, ways: single-phase, 50 Hz supply. Hooked over the edge of a sink using the plastic Check that your domestic electrical installation can hose guide supplied with the machine. -
Page 9: Your New Washing Machine
Pagina 9 Your new washing machine This new washing machine, which is fitted with the Direct Spray system, patented Electrolux, meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption. Further savings are achieved by washing small loads of laundry, since water and electricity consumption is proportional to the quantity and type of laundry being washed. -
Page 10: Use
132997230•gb 19-04-2001 15:24 Pagina 10 Control panel 1200 EW 1267 F 1 2 3 5 6 7 8 9 10 11 13 14 1 Programme chart Position E corresponds to the ENERGY SAVING programme and position to “cold wash”. A programme chart in English is supplied with the At the end of the programme the selector dial user manual. -
Page 11: Extra Rinse Button
Energy saving programme. • Delicates: To be used for lightly soiled laundry. 500 max 700 r.p.m. EW 1067 F 9 Extra rinse button • Cotton, linen: Can be used with all programmes except the wool 450/650/850 max 1000 r.p.m. - Page 12 132997230•gb 19-04-2001 15:24 Pagina 12 12 DISPLAY The countdown is updated every hour. The display shows the following information: Cancelling - Duration of the programme - Delayed start - Incorrect option selection - Alarm code - End of programme. Cancelling If a programme has been cancelled - programme selector dial on position O - three flashing dashes appear on the display.
-
Page 13: Functions
132997230•gb 19-04-2001 15:24 Pagina 13 • The water of the last rinse on programmes with End of programme Anti-crease option is emptied out and the laundry is spun. When the programme has finished a flashing zero is displayed. 14 Programme progress display By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on. -
Page 14: Programme Information
132997230•gb 19-04-2001 15:24 Pagina 14 Interrupting a programme • At the end of the soak (after having emptied out the water) you can select the washing programme. Depress the START/PAUSE button to interrupt a Turn first the programme selector dial to O, then programme which is running, the corresponding light select the programme and depress the starts to flash. -
Page 15: Washing Hints
132997230•gb 19-04-2001 15:24 Pagina 15 Laundry weights Washing hints The following weights are indicative: bathrobe 1200 g Sorting the laundry napkin 100 g Follow the wash code symbols on each garment quilt cover 700 g label and the manufacturer’s washing instructions. Sort the laundry as follows: sheet 500 g... -
Page 16: Detergents And Additives
132997230•gb 19-04-2001 15:24 Pagina 16 Ink: depending on the type of ink, moisten the fabric Quantity of detergent to be used first with acetone (*), then with acetic acid; treat any The type and quantity of detergent will depend on residual marks on white fabrics with bleach and then the type of fabric, load size, degree of soiling and rinse thoroughly. -
Page 17: International Wash Code Symbols
132997230•gb 19-04-2001 15:24 Pagina 17 International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max. wash temperature temperature temperature temperature 95 C... -
Page 18: Operating Sequence
132997230•gb 19-04-2001 15:24 Pagina 18 4. Switch the machine on Operating sequence To switch the machine on, press the ON/OFF button : the mains-on light comes on. Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. -
Page 19: Select The Required Options
132997230•gb 19-04-2001 15:24 Pagina 19 7. Select the required options The pilot light corresponding to the wash phase which is running is on. The light corresponding to the depressed button The door light comes on to indicate that the door is illuminates. -
Page 20: Washing Programmes
132997230•gb 19-04-2001 15:24 Pagina 20 Programme chart Washing programmes Consumption* Type of Programme Additional Max. Section Temp. fabric description functions load Energy Water Time min. light blue 95° White Wash at 95°C 5.5 kg cotton 3 rinses Normal spin White 5.5 kg light blue Wash at 67°C... -
Page 21: Special Programmes
132997230•gb 19-04-2001 15:24 Pagina 21 Programme chart Special programmes Consumption* Selector Programme Additional Max. Section dial Programme description functions load Energy Water Time position min. blue Soak Soak at 30°C 5.5 kg stop with water in tub. To drain, depress START/PAUSE button The machine... -
Page 22: Maintenance
132997230•gb 19-04-2001 15:24 Pagina 22 Maintenance 1. Bodywork 3. Drain filter Clean the outside of the machine with warm water The drain filter collects threads and small objects and a neutral, non-abrasive household detergent. inadvertently left in the laundry. Check regularly that Rinse with clean water and dry with a soft cloth. -
Page 23: Emergency Emptying Out
132997230•gb 19-04-2001 15:24 Pagina 23 5. Emergency emptying out If the water is not discharged (outlet pump is blocked, filter or drain hose are clogged), proceed as follows to empty out the machine: • pull out the plug from the power socket; •... -
Page 24: Something Not Working
132997230•gb 19-04-2001 15:24 Pagina 24 Something not working? Problems which you can resolve yourself. During machine operation it is possible that one of the following alarm codes appears on the display and at the same time the light , the light of the START/PAUSE button and one of the following lights start to flash: - E10 + : problem with the water supply... - Page 25 132997230•gb 19-04-2001 15:24 Pagina 25 Problem Possible cause • Spinning starts late or the • The electronic unbalance detection device has cut in because the laundry is not evenly distributed in laundry is not spun enough: the drum. The laundry is redistributed by reverse rotation of the drum.