SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual IMPORTANT INFORMATION Warnings and Notices When using electrical equipment, basic safety precautions should always be followed including the following: a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. b. Do not use outdoors. c.
SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual TABLE OF CONTENTS Showline Offices............................. Inside Front Cover IMPORTANT INFORMATION Warnings and Notices................................. 1 Additional Resources for DMX512............................ 1 Showline Limited Two-Year Warranty ..........................1 TABLE OF CONTENTS PREFACE About this Manual ..................................3 Included Items.....................................
1. About this Manual The document provides installation and operation instructions for the following products: SL STRIP 400 RGBW LED Luminaire (IP20 rated) Please read all instructions before installing or using this product. Retain this manual for future reference. Additional product information and descriptions may be found on the product specification sheet.
SL STRIP 400 RGBW LED Luminaires Installation & User's Manual SL STRIP 400 RGBW LED LUMINAIRE OVERVIEW 1. SL STRIP 400 RGBW LED Luminaire Components Major Luminaire Components Side of Unit Luminaire Mount* Luminaire Mount* High-Intensity RGBW LED Array (x36) Top of Unit Safety Cable Anchor Points Safety Cable Anchor Points...
SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual INSTALLATION AND SET UP 1. Power Requirements The SL STRIP 400 RGBW LED Luminaire operates on AC input voltages from 100 to 240 VAC. WARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable to completely remove power from unit when not in use.
400 RGBW LED Luminaire is straight forward. A total of 3 wires/conductors is supplied from the unit. The following wiring scheme is used: Table 2: SL STRIP 400 RGBW LED Luminaire (IP20 Rated Models) AC Input Connections Wire Color Purpose...
SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual 3. Connecting to the DMX512 Network Basic DMX512 installation consists of connecting multiple SL STRIP 400 RGBW LED Luminaires together (up luminaires) in "daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to to 32 the DMX connector on the first SL STRIP 400 RGBW LED Luminaire.
SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual 4. Mounting Luminaire The SL STRIP 400 RGBW LED Luminaire is provided with two mounts and multiple safety cable anchor points "Major Luminaire Components" on page 4 described in and Figure 7 on page 10.) The two mounts are easily removed and reversed as required (as illustrated in Figure 6).
Page 12
SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual "SL Note: Mounting hooks, clamps, etc. are sold separately or by others. For available mounting accessories refer to STRIP 400 RGBW LED Luminaire Accessories" on page 3. Hooks / Clamps (sold separately) Note: Mount...
SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual 3. Quick Selection Buttons When in Manual Mode, the SL STRIP 400 RGBW LED Luminaire’s features can be accessed via the on-board LCD menu system or via three quick select buttons: •...
• S_Curve • Square Curve Linear Curve PL_Curve * DMX Value DMX Value *Same dimming response curve of certain Philips Selecon and Philips Vari-Lite luminaires. S_Curve Square Curve DMX Value DMX Value Figure 10: SL STRIP 400 RGBW LED Luminaire Dimmer Curves...
SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual 5. Master / Slave Operational Mode The Master / Slave Operational Mode allows one SL STRIP 400 RGBW LED Luminaire to act as the "Master" unit and all other connected units are controlled by this unit. When a unit is set to "Slave" mode, it will only listen to and follow any commands sent from a "Master"...
Page 30
Table 7: SL STRIP 400 RGBW LED Lu minaire RDM Product Parameters Ids Model ID Manufacturer Model Description Product Category 0x1100 Philips Entertain. Lighting Asia SL STRIP 400 (RGBW) 0x0509 Table 8: SL STRIP 400 RGBW LED Luminaire RDM UID MSB of ESTA LSB of ESTA...
Page 32
SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual Table 10: SL STRIP 400 RGBW LED Luminaire RDM Manufacturer Status IDs Manufacturer Specific messages are in the range of 0x8000 - 0xFFDF. Each Manufacturer-specific Status ID shall have a unique meaning, which shall be consistent across all products having a given Manufacturer ID.
SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual CLEANING AND CARE WARNING! All cleaning should be performed with power completely removed from the luminaire. Never remove protective covers when luminaire is powered. Wear appropriate protective eye wear and gloves when cleaning the fixture.
Die Cast Aluminium with Powder Coating Compliance: CE Marked (International models) IP Rating: IP20 Note: Common model specifications shown. For specific model specifications, features, and accessories, refer to the product specification sheet for more details. 2. SL STRIP 400 RGBW LED Luminaire Dimensions...
Page 35
SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual Notes Sh wline SL STRIP 400 RGBW LED Luminaire Dimensions...