Hardware Installation; Installation Procedures - Asus 3DP-V264GT User Manual

3d graphic cards hardware & video drivers
Table of Contents

Advertisement

III. Hardware Installation
This section tells you how to install the ASUS graphics card in your PC computer.
The steps provided below demonstrate how to install the cards in a typical system.
Your system may be slightly different.
!
WARNING: Computer boards and components contain very delicate
Integrated Circuit (IC) chips. To protect the computer board and other compo-
nents against damage from static electricity, you should follow some precau-
tions whenever you work on your computer.
1. Make sure that you unplug your power supply when adding or removing
expansion cards or other system components. Failure to do so may cause
severe damage to both your motherboard and expansion cards.
2. Hold components by the edges and try not to touch the IC chips, leads, or
circuitry.
3. Use a grounded wrist strap before handling computer components.
4. Place components on a grounded antistatic pad or on the bag that came with
the component whenever the components are separated from the system.
IMPORTANT: Keep the host adapter in its antistatic bag until you are ready
to install it. Before you pick up the adapter, ground yourself by touching an
unpainted surface on the computer chassis. Even a little static electricity can
destroy a host adapter component!

Installation Procedures:

1. Unplug all electrical cords on your computer.
2. Remove the screws for the back of the system unit cover.
3. Remove the system unit cover.
4. Find an unused 5 Volt PCI bus expansion slot or MediaBus expansion slot. Make
sure this slot is unobstructed. .
5. Remove the corresponding expansion slot cover from the computer chassis. The
slot cover is the metal strip in the back of the computer chassis that covers the
opening for the adapter's external connector.
6. Ground yourself to an antistatic mat or other grounded source.
7. Pick up the board (still in its sleeve) by grasping the edge bracket with one hand.
Avoiding touching board components.
8. Remove the plastic sleeve.
ASUS 3DP-V264GT/PRO & 3DP-V264GT2/TV User's Manual
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

ProTv3dp-v264gt23dp-v264gt/pro3dp-v264gt2/tv

Table of Contents