Panasonic PT-EZ770Z Operating Instructions Manual
Hide thumbs
Also See for PT-EZ770Z:
- Service manual (137 pages) ,
- Information for users (70 pages) ,
- Operating instructions manual (153 pages)
Table of Contents
Advertisement
Thank you for purchasing this Panasonic product.
■ This manual is common to all the models regardless of suffixes of the Model No.
z Without L : The standard zoom lens supplied
■ Before operating this product, please read the instructions carefully and save this manual
for future use.
■ Before using this product, be sure to read "Read this first!" ( x pages 2 to 11).
Operating Instructions
LCD Projector
Model No.
With L : The lens sold separately
Functional Manual
Commercial Use
PT-EZ770Z
PT-EW730Z
PT-EX800Z
ENGLISH
TQBJ0636
Advertisement
Table of Contents
Related Manuals for Panasonic PT-EZ770Z
Summary of Contents for Panasonic PT-EZ770Z
-
Page 1: Operating Instructions
Model No. PT-EW730Z PT-EX800Z Thank you for purchasing this Panasonic product. ■ This manual is common to all the models regardless of suffixes of the Model No. z Without L : The standard zoom lens supplied With L : The lens sold separately ■... -
Page 2: Read This First
Read this first! Read this first! WARNING: THIS APPARATUS MUST BE EARTHED. WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflexions at visual display workplaces this device must not be placed in the direct field of view. - Page 3 This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149. For USA-California Only This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material –...
- Page 4 Read this first! FCC NOTICE (USA) Verification Model Number: PT-EZ770Z / PT-EZ770ZL / PT-EW730Z / PT-EW730ZL / PT-EX800Z / PT-EX800ZL Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America Address: Two Riverfront Plaza, Newark, NJ 07102-5490 Telephone number: (877)803-8492 E-mail: projectorsupport@us.panasonic.com...
- Page 5 L or coloured RED. How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse. Importer’s name and address within the European Union Panasonic Marketing Europe GmbH Panasonic Testing Center Winsbergring 15, 22525 Hamburg, Germany...
- Page 6 Read this first! WARNING: r POWER The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately. Continued use of the projector in these conditions will result in fire or electric shock. f If foreign objects or water get inside the projector, cut off the power supply.
- Page 7 If liquid enters inside of the projector, consult your dealer. f Particular attention must be paid to children. Use the ceiling mount bracket specified by Panasonic. Using the ceiling mount bracket other than the specified one will result in falling accidents.
- Page 8 Read this first! WARNING: r ACCESSORIES Do not use or handle the batteries improperly, and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire. f Use AAA/R03/LR03 batteries. f Do not use unspecified batteries. f Do not use chargeable batteries.
- Page 9 Read this first! CAUTION: r POWER When disconnecting the power cord, be sure to hold the power plug and power connector. If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks will result.
-
Page 10: Remote Control Battery
Read this first! CAUTION: r MAINTENANCE Do not attach the air filter unit while it is wet. Doing so may result in electric shock or malfunctions. f After you clean the air filter units, dry them thoroughly before reattaching them. Ask your dealer about cleaning inside the projector once a year. - Page 11 Read this first! Brazil Only Brasil Apenas r Manuseio de baterias usadas BRASIL Após o uso, as pilhas e/ou baterias deverão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada. Cobrir os terminais positivo (+) e negativo (-) com uma fita isolante adesiva, antes de depositar numa caixa destinada para o recolhimento.
- Page 12 rTrademarks f Windows, Windows Vista, and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. f Macintosh and Mac, Mac OS, OS X, and Safari are trademarks of Apple Inc., registered in the United States and other countries.
-
Page 13: Features Of The Projector
(x page 41) *1 For PT-EX800Z 7 000 lm for PT-EW730Z, and 6 500 lm for the PT-EZ770Z 3. Connect with external devices. Easy and highly flexible setup (x page 42) ▶... -
Page 14: Table Of Contents
Contents Contents Be sure to read “Read this first!” from page 2. Read this first! Chapter 3 Basic Operations Switching on/off the projector Chapter 1 Preparation Connecting the power cord Power indicator Precautions for use Switching on the projector Cautions when transporting Making adjustments and selections Cautions when installing Switching off the projector... - Page 15 Contents [PICTURE] menu [PROJECTOR SETUP] menu [PICTURE MODE] [PROJECTOR ID] [CONTRAST] [PROJECTION METHOD] [BRIGHTNESS] [ECO MANAGEMENT] [COLOR] [SCHEDULE] [TINT] [STARTUP INPUT SELECT] [COLOR TEMPERATURE] [RS-232C] [GAMMA] [REMOTE2 MODE] [SHARPNESS] [FUNCTION BUTTON] [NOISE REDUCTION] [AUDIO SETTING] [IRIS] [STATUS] [DAYLIGHT VIEW] [DATE AND TIME] [SYSTEM SELECTOR] [SAVE ALL USER DATA] sRGB-compliant video...
- Page 16 Contents Maintenance/replacement Before performing maintenance/replacement Maintenance Replacing the unit Troubleshooting Chapter 6 Appendix Technical information PJLink protocol Control commands via LAN <SERIAL IN> terminal <REMOTE 2 IN> terminal Two-window display combination list [MENU LOCK PASSWORD] operations List of compatible signals Specifications Dimensions Precautions for Ceiling Mount Bracket...
-
Page 17: Chapter 1 Preparation
Preparation Chapter 1 This chapter describes things you need to know or check before using the projector. ENGLISH - 17... -
Page 18: Precautions For Use
Lens Be sure to use the standard zoom lens supplied with the projector (PT-EZ770Z, PT-EW730Z, PT-EX800Z only) or the specified Projection Lens (optional). The standard zoom lens supplied with PT-EZ570 series, PT-EW630 series, PT-EW530 series, PT-EX600 series, PT-EX500 series is different from the lens of this projector. - Page 19 Chapter 1 Preparation — Precautions for use rFocus adjustment The projection lens is thermally affected by the light from the light source, making the focus unstable in the period just after switching on the power. Before adjusting the lens focus, wait at least 30 minutes with the image projected. rDo not install the projector at elevations of 2 700 m (8 858') or higher above sea level.
-
Page 20: Security
Make your password difficult to guess as much as possible. f Change your password periodically. f Panasonic Corporation or its affiliate companies will never ask for your password directly. Do not divulge your password in case you receive such inquiries. -
Page 21: Disposal
Chapter 1 Preparation — Precautions for use rLCD panel f The LCD panel is precision-made. Note that in rare cases, pixels of high precision could be missing or always lit. Note that such phenomena do not indicate malfunction. If still images are projected for a long time, a residual image may remain on the LCD panel. -
Page 22: Accessories
Chapter 1 Preparation — Precautions for use Accessories Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the number of accessories. Wireless/wired remote control unit <1> Lens hole cover <1> (N2QAYA000063) (Only lens optional models) (Attached to the projector at the time of purchase) (6103619194) Lens cover <1>... -
Page 23: Optional Accessories
Chapter 1 Preparation — Precautions for use Software Multi Projector Monitoring & This software allows you to monitor and control multiple Control Software (Windows) projectors connected to the LAN. Logo Transfer Software This software allows you to transfer original images, such as (Windows) company logos to be displayed when projection starts, to the projector. -
Page 24: Start-Up Display
Chapter 1 Preparation — Start-up display Start-up display When the projector is switched on for the first time after purchase as well as when [ALL USER DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] is executed, the focus adjustment screen is displayed after projection starts, then the initial setting screen is displayed. Set them in accordance with circumstances. -
Page 25: Initial Setting (Standby Mode)
Chapter 1 Preparation — Start-up display Initial setting (standby mode) Set the operation mode during standby. The default setting is [ECO] that keeps power consumption low during standby. When the network function is used during standby, set to [NORMAL]. After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu →... -
Page 26: About Your Projector
Chapter 1 Preparation — About your projector About your projector Remote control Front Bottom Power standby <v> button 13 <AUTO SETUP> button Sets the projector to the state where the projector is switched Automatically adjusts the image display position while the off (standby mode) when the <MAIN POWER>... -
Page 27: Projector Body
Chapter 1 Preparation — About your projector f Avoid contact with liquids or moisture. f Do not attempt to modify or disassemble the remote control. Note f When operating the remote control by directly pointing the remote control signal receiver of the projector, operate the remote control at a distance approx. -
Page 28: Control Panel
Chapter 1 Preparation — About your projector Bottom Projection direction 18 Burglar hook port 20 Lens release button Attaches a burglar prevention cable, etc. 21 Lamp cover 19 Luminance sensor (x page 68) The lamp unit is inside. Attention f Do not block the ventilation ports (intake and exhaust) of the projector. r Control panel Power standby <v/b>... -
Page 29: Connecting Terminals
Chapter 1 Preparation — About your projector r Connecting terminals <DIGITAL LINK/LAN> terminal <DVI-D IN> terminal This is the LAN terminal to connect to the network. This is also This is the terminal to input DVI-D signals. used when connecting a device for transmitting video and audio <DisplayPort IN>... -
Page 30: Using The Remote Control
Chapter 1 Preparation — Using the remote control Using the remote control Inserting and removing the batteries (ii) Fig. 1 Fig. 2 Open the cover. (Fig. 1) Insert the batteries and close the cover (insert the m side first). (Fig. 2) f When removing the batteries, perform the steps in reverse order. -
Page 31: Connecting To The Projector With A Cable
Chapter 1 Preparation — Using the remote control Connecting to the projector with a cable When controlling the projector by wired remote control, connect the <REMOTE 1 IN> terminal on the projector to the remote control wired terminal on the remote control by a commercial M3 stereo mini jack cable. The remote control is effective even in places where an obstacle stands in the light path or where devices are susceptible to outside light. -
Page 32: Chapter 2 Getting Started
Getting Started Chapter 2 This chapter describes things you need to do before using the projector such as the setup and connections. 32 - ENGLISH... -
Page 33: Setting Up
Chapter 2 Getting Started — Setting up Setting up Installation mode There are four ways to set up the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 88) depending on the installation method. Mounting on the ceiling and projecting forward Setting on a desk/floor and projecting from rear (Using the translucent screen) Menu item... -
Page 34: Projected Image Size And Throw Distance
Chapter 2 Getting Started — Setting up Projected image size and throw distance Refer to the projected image size and projection distance shown below to install the projector. The image size and image position can be adjusted in accordance with the screen size and screen position. Projected image Screen L (LW/LT) -
Page 35: Projection Distance By Projection Lens
Projection distance by Projection Lens A ±5 % error in listed projection distances may occur. In addition, when [KEYSTONE] is used, distance is corrected to become smaller than the specified screen size. For PT-EZ770Z r When the screen aspect ratio is 16:10 (Unit: m) - Page 36 Chapter 2 Getting Started — Setting up r When the screen aspect ratio is 4:3 (Unit: m) Optional lens Fixed- Ultra long Standard Lens type Short focus Long focus Height position (H) zoom lens focus focus zoom zoom lens zoom lens lens lens Projection Lens Model No.
- Page 37 Chapter 2 Getting Started — Setting up r When the screen aspect ratio is 16:9 (Unit: m) Optional lens Fixed- Ultra long Standard Lens type Short focus Long focus Height position (H) zoom lens focus focus zoom zoom lens zoom lens lens lens Projection Lens Model No.
- Page 38 Chapter 2 Getting Started — Setting up For PT-EX800Z r When the screen aspect ratio is 4:3 (Unit: m) Optional lens Standard Fixed- Ultra long Lens type Short focus Long focus Height position (H) zoom lens focus focus zoom zoom lens zoom lens lens lens...
- Page 39 To use a screen size not listed in this manual, check the screen size SD (m) and use the respective formula to calculate projection distance. The unit of all the formulae is m. (Values obtained by the following calculation formulae contain a slight error.) For PT-EZ770Z Projection Lens...
-
Page 40: Adjusting Adjustable Feet
Chapter 2 Getting Started — Setting up Projection Lens Lens type Aspect ratio Projection distance (L) formula Model No. Min. (LW) L = 2.3952 x SD - 0.1139 16:10 Max. (LT) L = 3.9041 x SD - 0.1128 Min. (LW) L = 2.4617 x SD - 0.1139 Long focus zoom lens ET-ELT20 16:9... -
Page 41: Removing/Attaching The Projection Lens
Chapter 2 Getting Started — Removing/attaching the Projection Lens Removing/attaching the Projection Lens Removing and attaching procedures of the Projection Lens are same for both standard zoom lens and optional lens. Move the lens to the home position before replacing or removing the Projection Lens. (x page 52) Attention f Replace the Projection Lens after turning off the power of the projector. -
Page 42: Connecting
Chapter 2 Getting Started — Connecting Connecting Before connecting f Before connecting, carefully read the operating instructions for the external device to be connected. f Turn off the power of all devices before connecting cables. f Take note of the following points before connecting the cables. Failure to do so may result in malfunctions. g When connecting a cable to a device connected to the projector or the projector itself, touch any nearby metallic objects to eliminate static electricity from your body before performing work. -
Page 43: Connecting Example: Av Equipment
Chapter 2 Getting Started — Connecting <DisplayPort IN> terminal pin assignments and signal names Outside view Pin No. Signal name Pin No. Signal name MainLane-3 (11) (12) MainLane+0 Even-numbered pins of (2) to (20) MainLane+3 (13) (20) MainLane-2 (14) (15) Aux+ MainLane+2 (16) MainLane-1... -
Page 44: Connecting Example: Computers
Chapter 2 Getting Started — Connecting Note f When entering DVI-D, some external devices to be connected may require switching the setting using the [DISPLAY OPTION] menu → [DVI-D IN] → [EDID]. f The <DVI-D IN> terminal can be connected to HDMI- or DVI-D-compliant devices. However, images may not appear or may not be displayed properly on some devices. -
Page 45: Connecting Example: Twisted-Pair-Cable Transmitter
Panasonic website (http://panasonic.net/avc/projector/). Note that the verification for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers. -
Page 46: Chapter 3 Basic Operations
Basic Operations Chapter 3 This chapter describes basic operations to start with. 46 - ENGLISH... -
Page 47: Switching On/Off The Projector
Chapter 3 Basic Operations — Switching on/off the projector Switching on/off the projector Connecting the power cord Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily. Confirm that the <MAIN POWER> switch is on the <OFF> side before connecting the power cord. For details of power cord handling, refer to “Read this first!”... -
Page 48: Switching On The Projector
Chapter 3 Basic Operations — Switching on/off the projector Note f While the power indicator <ON (G)/STANDBY (R)> is lit in orange, the fan is running to cool the projector. f For about 75 seconds after the projector is switched off and the luminous lamp cooling is started, the lamp indicators do not light up even if the power is switched on. -
Page 49: Switching Off The Projector
Chapter 3 Basic Operations — Switching on/off the projector Change the setting of [PROJECTOR SETUP] menu → [PROJECTION METHOD] depending on the installation mode. (x page 33) f Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. Press the <INPUT>... -
Page 50: Direct Power Off Function
Chapter 3 Basic Operations — Switching on/off the projector Direct power off function The projector can be turned off during projection or immediately after the luminous lamp is turned off by setting the <MAIN POWER> switch to <OFF>. Also, when the projector is mounted on the ceiling or installed in an environment where the <MAIN POWER> switch of the projector cannot be easily turned <OFF>, the power can be turned off directly using the circuit breaker. -
Page 51: Projecting
Chapter 3 Basic Operations — Projecting Projecting Check the attachment of the Projection Lens (x page 41), external device connection (x page 42), power cord connection (x page 47), and switch on the projector (x page 48) to start projecting. Select the image for projection, and adjust appearance of the projected image. -
Page 52: Moving The Lens To The Home Position
Projection position can be adjusted with the optical axis shift based on the standard projection position in the respective range. Zoom lens Lens type Standard zoom lens, ET-ELW20, ET-ELT20, ET-ELT21 Standard projection position PT-EZ770Z, PT-EW730Z 0.1 H 0.1 H Image width H Standard projection position PT-EX800Z 0.1 H... -
Page 53: Operating With The Remote Control
Chapter 3 Basic Operations — Operating with the remote control Operating with the remote control Switching the input The input for projection can be switched. button Press the input selection (<RGB1/2>, <DIGITAL LINK>, <DVI-D>, <VIDEO>, <DisplayPort>, <HDMI>) buttons. f This operation can be also performed using the <INPUT> button on the control panel. Switches the input to RGB1 or RGB2. -
Page 54: Using The Mute Function
Chapter 3 Basic Operations — Operating with the remote control Attention f When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [SHUTTER DETECTION] is set to [ON], do not switch the shutter on (closed)/off (open) in a short time. Note f The power indicator <ON (G)/STANDBY (R)> will flash slowly in green while the shutter function is in use. Using the mute function Audio can be temporarily turned off. -
Page 55: Using The Presentation Timer Function
Chapter 3 Basic Operations — Operating with the remote control Note f If you press the <MENU> button on the control panel for at least three seconds while the on-screen display is off (hidden), the on-screen display is turned on. Using the presentation timer function The presentation timer function can be operated. -
Page 56: Using The Digital Zoom Function
Chapter 3 Basic Operations — Operating with the remote control Press the <KEYSTONE> button again. f The other individual adjustment screen is displayed. When the [KEYSTONE] individual adjustment screen is displayed in Step 1), the [CORNER CORRECTION] individual adjustment screen ([UPPER LEFT]) is displayed. Note f After the individual adjustment screen of [KEYSTONE] or [CORNER CORRECTION] is displayed, press asqw to adjust the keystone distortion. -
Page 57: Using The Function Button
Chapter 3 Basic Operations — Operating with the remote control Using the function button [SUB MEMORY], [SYSTEM SELECTOR], [DAYLIGHT VIEW], or [TEST PATTERN] operations can be assigned to the <FUNCTION> button on the remote control so that it can be used as an easy shortcut button. button Press the <FUNCTION>... -
Page 58: Chapter 4 Settings
Settings Chapter 4 This chapter describes the settings and adjustments you can make using the on-screen menu. 58 - ENGLISH... -
Page 59: Menu Navigation
Chapter 4 Settings — Menu navigation Menu navigation The on-screen menu (Menu) is used to perform various settings and adjustments of the projector. Navigating through the menu Operating procedure button Press the <MENU> button on the remote control or control panel. f The [MAIN MENU] screen is displayed. -
Page 60: Main Menu
Chapter 4 Settings — Menu navigation Press as to select a sub-menu, and press qw or the <ENTER> button to change or adjust settings. f Some items will switch in order as follows each time you press qw. f For some items, press qw to display an individual adjustment screen with a bar scale as shown below. CONTRAST ADJUST Note... -
Page 61: Sub-Menu
Chapter 4 Settings — Menu navigation Main menu item Page [TEST PATTERN] [SIGNAL LIST] [SECURITY] [NETWORK] Sub-menu The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu. [PICTURE] Sub-menu item Factory default Page [PICTURE MODE] [STANDARD]... -
Page 62: Display Language
Chapter 4 Settings — Menu navigation [DISPLAY LANGUAGE] Details (x page 76) [DISPLAY OPTION] Sub-menu item Factory default Page [COLOR ADJUSTMENT] [OFF] [COLOR CORRECTION] [OFF] [SCREEN SETTING] ― [AUTO SIGNAL] [OFF] [AUTO SETUP] ― [RGB IN] ― [DVI-D IN] ― [HDMI IN] ―... - Page 63 Chapter 4 Settings — Menu navigation [SECURITY] Sub-menu item Factory default Page [SECURITY PASSWORD] [OFF] [SECURITY PASSWORD CHANGE] ― [DISPLAY SETTING] [OFF] [TEXT CHANGE] ― [MENU LOCK] [OFF] [MENU LOCK PASSWORD] ― [CONTROL DEVICE SETUP] ― [NETWORK] Sub-menu item Factory default Page [DIGITAL LINK MODE] [AUTO]...
-
Page 64: [Picture] Menu
Chapter 4 Settings — [PICTURE] menu [PICTURE] menu On the menu screen, select [PICTURE] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f After selecting the item, press asqw to adjust. -
Page 65: [Brightness]
Chapter 4 Settings — [PICTURE] menu [BRIGHTNESS] You can adjust the dark (black) part of the projected image. Press as to select [BRIGHTNESS]. Press qw or the <ENTER> button. f The [BRIGHTNESS] individual adjustment screen is displayed. Press qw to adjust the level. Operation Adjustment Range of adjustment... - Page 66 Chapter 4 Settings — [PICTURE] menu Note f When [COLOR ADJUSTMENT] (x page 77) is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER]. Adjusting desired white balance Press as to select [COLOR TEMPERATURE]. Press qw or the <ENTER> button. f The [COLOR TEMPERATURE] individual adjustment screen is displayed.
-
Page 67: [Gamma]
Chapter 4 Settings — [PICTURE] menu Note f When a name is changed, display of [USER] is also changed. [GAMMA] You can adjust contrast balance. Press as to select [GAMMA]. Press qw or the <ENTER> button. f The [GAMMA] individual adjustment screen is displayed. Press qw to adjust the level. -
Page 68: [Daylight View]
Chapter 4 Settings — [PICTURE] menu Press qw to switch the item. f The items will switch each time you press the button. [OFF] No correction. [ON] Automatically corrects the aperture. [DAYLIGHT VIEW] You can correct the image to the optimal vividness even if it is projected under a bright light. Press as to select [DAYLIGHT VIEW]. -
Page 69: Srgb-Compliant Video
Chapter 4 Settings — [PICTURE] menu sRGB-compliant video sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International Electrotechnical Commission). Set according to the following steps to reproduce more faithful, sRGB compliant colors. Set [COLOR ADJUSTMENT] to [OFF]. f Refer to [COLOR ADJUSTMENT] (x page 77). -
Page 70: [Position] Menu
Chapter 4 Settings — [POSITION] menu [POSITION] menu On the menu screen, select [POSITION] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f After selecting the item, press asqw to adjust. -
Page 71: [Zoom]
Chapter 4 Settings — [POSITION] menu The projector identifies the video ID (VID) embedded in the video signals and displays the image by [VID AUTO] automatically switching the screen sizes between 4:3 and 16:9. This function is effective for NTSC signals. The projector identifies the video ID (VID) embedded in the video signals and displays the image by [AUTO] automatically switching the screen sizes between 4:3 and 16:9. -
Page 72: [Clock Phase]
Chapter 4 Settings — [POSITION] menu When [ASPECT] is set to [NORMAL] Press as to select [ZOOM]. Press the <ENTER> button. f The [ZOOM] screen is displayed. Press as to select [MODE]. Press qw to switch the item. [INTERNAL] Enlarges the size within the aspect range set with [SCREEN FORMAT]. [FULL] Enlarges or reduces the size using the entire display area set with [SCREEN FORMAT]. - Page 73 Chapter 4 Settings — [POSITION] menu [KEYSTONE] [VERTICAL] [HORIZONTAL] Setting [CORNER CORRECTION] Press as to select [KEYSTONE]. Press the <ENTER> button. Press as to select [CORNER CORRECTION]. Press the <ENTER> button. f The [CORNER CORRECTION] screen is displayed. Press as to select the item to adjust, and press the <ENTER> button. f The [CORNER CORRECTION] individual adjustment screen ([UPPER LEFT], [UPPER RIGHT], [LOWER LEFT] or [LOWER RIGHT]) is displayed.
-
Page 74: [Advanced Menu] Menu
Range of adjustment Press the q The blanking zone moves upward. button. Top of the screen [UPPER] PT-EZ770Z: Top to bottom Press the w The blanking zone 0 - 599 moves downward. button. PT-EW730Z: Top to bottom 0 - 399... -
Page 75: [Input Resolution]
The blanking zone Press the w moves to the right. button. Left side of the [LEFT] screen PT-EZ770Z: Left to right The blanking zone Press the q 0 - 959 button. moves to the left. PT-EW730Z: Left to right 0 - 639... -
Page 76: [Display Language] Menu
Chapter 4 Settings — [DISPLAY LANGUAGE] menu [DISPLAY LANGUAGE] menu On the menu screen, select [DISPLAY LANGUAGE] from the main menu, and display the sub- menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f Press as to select a language, and press the <ENTER>... -
Page 77: [Display Option] Menu
Chapter 4 Settings — [DISPLAY OPTION] menu [DISPLAY OPTION] menu On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f After selecting the item, press asqw to set. -
Page 78: [Screen Setting]
Adjusts the vertical position between -96 and 96. Press as to select [SCREEN POSITION]. f If [SCREEN FORMAT] is set to [16:10] on PT-EZ770Z, PT-EW730Z, or [SCREEN FORMAT] is set to [4:3] on PT-EX800Z, then selection and adjustment of [SCREEN POSITION] are not available. -
Page 79: [Rgb In]
Chapter 4 Settings — [DISPLAY OPTION] menu Select when an image aspect ratio is a wide-screen signal, which does not meet the [DEFAULT] [WIDE] settings. [USER] Select when receiving a signal with a special horizontal resolution (number of display dots). f When [DEFAULT] or [WIDE] is selected, proceed to Step 7). f When [USER] is selected, proceed to Step 5). -
Page 80: [Dvi-D In]
Chapter 4 Settings — [DISPLAY OPTION] menu Setting [RGB2 INPUT SETTING] Press as to select [RGB IN]. Press the <ENTER> button. f The [RGB IN] screen is displayed. Press as to select [RGB2 INPUT SETTING]. Press qw to switch the item. f The items will switch each time you press the button. -
Page 81: [Digital Link In]
Chapter 4 Settings — [DISPLAY OPTION] menu Select when the HDMI terminal output of an external device (such as a Blu-ray disc player) is [64-940] connected to the <HDMI IN> terminal. Select when the DVI-D terminal output of an external device (such as a computer) is connected to the <HDMI IN>... - Page 82 Chapter 4 Settings — [DISPLAY OPTION] menu Press the <ENTER> button. f The [ON-SCREEN DISPLAY] screen is displayed. Press as to select [OSD POSITION]. Press qw to switch the item. f The items will switch each time you press the button. Sets to the center left of the screen.
-
Page 83: [Closed Caption Setting]
Chapter 4 Settings — [DISPLAY OPTION] menu Press the <ENTER> button. f The [ON-SCREEN DISPLAY] screen is displayed. Press as to select [INPUT GUIDE]. Press qw to switch the item. f The items will switch each time you press the button. [ON] Displays the input guide. -
Page 84: [Back Color]
Displays the entire projection area in blue. [BLACK] Displays the entire projection area in black. [DEFAULT LOGO] Displays the Panasonic logo. [USER LOGO] Displays the image registered by the user. Note f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM. -
Page 85: [P-Timer]
Chapter 4 Settings — [DISPLAY OPTION] menu Press the <ENTER> button. f The [SHUTTER SETTING] screen is displayed. Press as to select [SHUT-OFF]. Press qw to switch the item. [KEEP CURRENT STATE] When the projector is switched off, the projector turns into standby with the shutter status as is. [OPEN] When the projector is switched off, the projector turns into standby with the shutter left opened. -
Page 86: [Freeze]
Chapter 4 Settings — [DISPLAY OPTION] menu Press the <MENU> button three times to clear. f The start time is displayed at the bottom right of the projected image. Note f Presentation timer operations are also possible by the <P-TIMER> button on the remote control. (x page 55) f The security message set in the [SECURITY] menu →... - Page 87 Chapter 4 Settings — [DISPLAY OPTION] menu Note f The magnification can be adjusted in increments of 0.1 between 1.0x and 2.0x. For some computer signals, the magnification can be adjusted up to 3.0x. f The digital zoom function is canceled if the <MENU> button is pressed during a digital zoom. f The digital zoom function is canceled if the input signal changes during a digital zoom.
-
Page 88: [Projector Setup] Menu
Chapter 4 Settings — [PROJECTOR SETUP] menu [PROJECTOR SETUP] menu On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub-menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f After selecting the item, press asqw to set. -
Page 89: [Eco Management]
Chapter 4 Settings — [PROJECTOR SETUP] menu [ECO MANAGEMENT] This function optimizes lamp power according to the operating status to reduce power consumption. Setting [LAMP POWER] Switch the brightness of the lamp according to the operating environment of the projector or the purpose. Press as to select [ECO MANAGEMENT]. -
Page 90: [Schedule]
Chapter 4 Settings — [PROJECTOR SETUP] menu Setting [NO SIGNAL SHUT-OFF] A function that automatically switches the power of the projector to standby if there is no input signal for a certain period of time. The time before switching to standby can be set. Press as to select [ECO MANAGEMENT]. - Page 91 Sets the volume. *1 When the Panasonic twisted-pair-cable transmitter (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the projector, its input name is reflected from [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, it is disabled.
-
Page 92: Rs-232C]
*1 When the Panasonic twisted-pair-cable transmitter (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the projector, its input name is reflected from [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, it is disabled. - Page 93 Setting the control commands of an existing projector When controlling the projector on a computer, set use of control commands on a previously purchased Panasonic projector. This allows the control software for an existing Panasonic projector to be inherited and used.
-
Page 94: [Remote2 Mode]
Chapter 4 Settings — [PROJECTOR SETUP] menu [REMOTE2 MODE] Set the <REMOTE 2 IN> terminal. Press as to select [REMOTE2 MODE]. Press qw to switch the item. f The items will switch each time you press the button. The pin assignment of the <REMOTE 2 IN> terminal is used by the factory default setting of the [DEFAULT] projector. - Page 95 Chapter 4 Settings — [PROJECTOR SETUP] menu Press qw to adjust the level. Operation Adjustment Range of adjustment Increases the volume on the right. Press w. L16 - R16 Increases the volume on the left. Press q. Setting audio output of the built-in speaker Press as to select [AUDIO SETTING].
-
Page 96: [Status]
Chapter 4 Settings — [PROJECTOR SETUP] menu Press the <ENTER> button. f The [AUDIO SETTING] screen is displayed. Press as to select the audio input. Press qw to switch the item. f The items will switch each time you press the button. Audio connected to the <AUDIO IN 1>... -
Page 97: [Date And Time]
Chapter 4 Settings — [PROJECTOR SETUP] menu [MEMORY NO.] Displays the memory number of the input signal. [INPUT] Displays the input terminal currently selected. [SIGNAL NAME] Displays the input signal name. [SIGNAL FREQUENCY] Displays the frequency of the input signal. [SYNC.STATE] Displays the synch polarity of the input signal. -
Page 98: [Save All User Data]
Chapter 4 Settings — [PROJECTOR SETUP] menu Press the <ENTER> button. f The [DATE AND TIME] screen is displayed. Press as to select [ADJUST CLOCK]. Press the <ENTER> button. f The [ADJUST CLOCK] screen is displayed. Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON]. Press as to select [APPLY], and press the <ENTER>... -
Page 99: [Service Password]
Chapter 4 Settings — [PROJECTOR SETUP] menu Deletes all the setting values saved for each input signal. [REGISTERED SIGNAL] To delete only a part of a registered signal, perform the procedure described in “Deleting the registered signal” (x page 104). [NETWORK/E-MAIL] Returns [NETWORK SETUP] and [E-mail set up] to factory default settings. -
Page 100: [P In P] Menu
Chapter 4 Settings — [P IN P] menu [P IN P] menu On the menu screen, select [P IN P] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f After selecting the item, press asqw to set. - Page 101 Chapter 4 Settings — [P IN P] menu 14) If [CLOCK PHASE] is selected in Step 8), press qw to make adjustment. 15) Press as to select [FRAME LOCK]. 16) Press qw to switch the item. [MAIN WINDOW] Set frame lock to the input signal set in the main window. [SUB WINDOW] Set frame lock to the input signal set in the sub window.
-
Page 102: [Test Pattern] Menu
Chapter 4 Settings — [TEST PATTERN] menu [TEST PATTERN] menu On the menu screen, select [TEST PATTERN] from the main menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f Press qw to switch. [TEST PATTERN] Display the test pattern built-in to the projector. -
Page 103: [Signal List] Menu
Chapter 4 Settings — [SIGNAL LIST] menu [SIGNAL LIST] menu On the menu screen, select [SIGNAL LIST] from the main menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. r Registered signal details A1 (1-2) Memory number: Sub memory number... -
Page 104: Protecting The Registered Signal
Chapter 4 Settings — [SIGNAL LIST] menu Press the <ENTER> button. f The [REGISTERED SIGNAL SETUP] screen is displayed. Press as to select [LOCK-IN RANGE]. Press qw to switch the item. f The items will switch each time you press the button. [NARROW] Select in most cases. -
Page 105: Sub Memory
Chapter 4 Settings — [SIGNAL LIST] menu Sub memory The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by the frequency or format of the synchronization signal source. Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same synchronization signal source. -
Page 106: [Security] Menu
Chapter 4 Settings — [SECURITY] menu [SECURITY] menu On the menu screen, select [SECURITY] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f When the projector is used for the first time Initial password: Press awsqawsq in order, and press the <ENTER>... -
Page 107: [Display Setting]
Chapter 4 Settings — [SECURITY] menu [DISPLAY SETTING] Overlap the security message (text or image) over the projecting image. Press as to select [DISPLAY SETTING]. Press qw to switch the item. f The items will switch each time you press the button. [OFF] The text display is disabled. -
Page 108: [Control Device Setup]
Chapter 4 Settings — [SECURITY] menu [CONTROL DEVICE SETUP] Enable/disable the button operations on the control panel and the remote control. Press as to select [CONTROL DEVICE SETUP]. Press the <ENTER> button. f The [CONTROL DEVICE SETUP] screen is displayed. Press as to select [CONTROL PANEL] or [REMOTE CONTROL]. [CONTROL PANEL] You can set the limitation on the control from the control panel. -
Page 109: [Network] Menu
Chapter 4 Settings — [NETWORK] menu [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f After selecting the item, press asqw to set. -
Page 110: [Digital Link Status]
Chapter 4 Settings — [NETWORK] menu When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button. Note f The projector does not support 10BaseT Full/Half. When the projector is connected to a twisted-pair-cable transmitter Press as to select [DIGITAL LINK SETUP]. Press the <ENTER>... -
Page 111: [Network Control]
Chapter 4 Settings — [NETWORK] menu Press as to select [STORE], and press the <ENTER> button. When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button. Note f When using a DHCP server, confirm that the DHCP server is running. f Consult your network administrator regarding the IP address, subnet mask, and default gateway. -
Page 112: Connecting To A Twisted-Pair-Cable Transmitter
Chapter 4 Settings — [NETWORK] menu f RoomView Server Edition Attention f When a LAN cable is directly connected to the projector, the network connection must be made indoors. Note f “Crestron Connected ” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems connected to a network using a computer. -
Page 113: Accessing From The Web Browser
Panasonic website (http://panasonic.net/avc/projector/). Note that the verification for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers. - Page 114 While updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction. f The subsequent web control screens show examples for PT-EZ770Z. Screen content may differ from that for the model you are using.
-
Page 115: Error Information Page
Chapter 4 Settings — [NETWORK] menu 13 [AROUND LAMP TEMPERATURE] 15 [SELF TEST] Displays the status of the temperature around the lamp of the Displays the self-diagnosis information. projector. 16 [PROJECTOR RUNTIME] 14 [LAMP RUNTIME] Displays the runtime of the projector. Displays the runtime of the lamps (converted value). - Page 116 Chapter 4 Settings — [NETWORK] menu [Network status] page Click [Status] → [Network status]. The current network setting status is displayed. [Access error] page Click [Status] → [Access error]. The error log on the web server is displayed such as access to the pages that do not exist or access with unauthorized user names or passwords.
- Page 117 Chapter 4 Settings — [NETWORK] menu [Basic control] page Click [Projector control] → [Basic control]. [INPUT] [SHUTTER] Switches the input signal. Switches the setting whether to use the shutter function (closing/opening of the shutter). [VOLUME] Adjusts the volume. [POWER] Turns on/off the power. [PICTURE MODE] Switches the picture mode.
- Page 118 Chapter 4 Settings — [NETWORK] menu [Network config] page Click [Detailed set up] → [Network config]. f Click [Network config] to display the [CAUTION!] screen. f Click the [Next] button to display the current settings. f Click the [Change] button to display the setting change screen. [PROJECTOR NAME] [DNS1] Enter the name of the projector.
-
Page 119: Adjust Clock] Page
Chapter 4 Settings — [NETWORK] menu [Adjust clock] page Click [Detailed set up] → [Adjust clock]. [Timezone] [Date] Selects the time zone. Enter the date to be changed. [Set time zone] [Time] Updates the time zone setting. Enter the time to be changed. [NTP SYNCHRONIZATION] [Set date and time] Sets to [ON] to adjust the date and time automatically. - Page 120 Chapter 4 Settings — [NETWORK] menu [E-mail set up] page When there is a problem or the runtime of a lamp reaches a set value, an E-mail can be sent to preset E-mail addresses (up to two addresses). Click [Detailed set up] → [E-mail set up]. [ENABLE] [MINIMUM TIME] Select [Enable] to use the E-mail function.
- Page 121 Chapter 4 Settings — [NETWORK] menu [Authentication set up] page Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail. Click [Detailed set up] → [Authentication set up]. [Auth] [Password] Selects the authentication method specified by your Internet Enter the password for the POP server or the SMTP server.
- Page 122 Chapter 4 Settings — [NETWORK] menu Contents of E-mail sent Example of E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been established. === Panasonic projector report(CONFIGURE) === Projector Type : EZ770 Serial No...
- Page 123 Chapter 4 Settings — [NETWORK] menu Example of the E-mail sent for an error The following E-mail is sent when an error has occurred. === Panasonic projector report(ERROR) === Projector Type : EZ770 Serial No : SN9250024 ----- check system -----...
- Page 124 Chapter 4 Settings — [NETWORK] menu [Administrator] account [Account] [New] Displays the account to change. [User name]: Enter the desired new user name. (Up to 16 characters in single [Current] byte) [User name]: [Password]: Enter the user name before the change. Enter the desired new password.
- Page 125 Chapter 4 Settings — [NETWORK] menu [Change password] (For user rights) Only the change of password is enabled under the user rights. [Old Password] [Retype] Enter the current password. Enter the desired new password again. [New Password] [OK] Enter the desired new password. (Up to 16 characters in single Determines the change of password.
- Page 126 Chapter 4 Settings — [NETWORK] menu [Tools] page Click [Tools] on the control page. [Control System] Network status Set the information required for communicating with the Displays the settings of wired LAN. [DHCP] controller to be connected with the projector. Displays the current setting. [User Password] [IpAddress] Set the user rights password for the Crestron Connected...
- Page 127 Chapter 4 Settings — [NETWORK] menu [Help] page Click [Help] on the control page. The [Help Desk] window is displayed. [Help Desk] Send/receive messages to/from an administrator who uses Crestron Connected ENGLISH - 127...
-
Page 128: Chapter 5 Maintenance
Maintenance Chapter 5 This chapter describes methods of inspection when there are problems, maintenance, and replacement of the units. 128 - ENGLISH... -
Page 129: Lamp/Temperature/Filter Indicators
Chapter 5 Maintenance — Lamp/temperature/filter indicators Lamp/temperature/filter indicators When an indicator lights up If a problem should occur inside the projector, the lamp indicator <LAMP>, the temperature indicator <TEMP>, and the filter indicator <FILTER> will inform you by lighting or flashing. Check the status of the indicators and remedy the indicated problems as follows. Attention f When switching off the projector to deal with problems, make sure to follow the procedure in “Switching off the projector”... - Page 130 Chapter 5 Maintenance — Lamp/temperature/filter indicators Temperature indicator <TEMP> Flashing in red Flashing in red Indicator status Lighting in red (2 times) (3 times) Internal temperature is high (standby Status Internal temperature is high (warning). The cooling fan has stopped. status). f Is the air intake/exhaust port blocked? Cause f Is the room temperature high?
-
Page 131: Maintenance/Replacement
Chapter 5 Maintenance — Maintenance/replacement Maintenance/replacement Before performing maintenance/replacement f Make sure to turn off the power before maintaining the projector or replacing the unit. (x pages 47, 49) f When switching off the projector, make sure to follow the procedures in “Switching off the projector” (x page 49). Maintenance Outer case Wipe off dirt and dust with a soft, dry cloth. - Page 132 Chapter 5 Maintenance — Maintenance/replacement Cleaning the air filter unit Remove the air filter unit beforehand according to the previously described procedure in “Removing the air filter unit”. Fig. 1 Fig. 2 Wash the air filter unit. (Fig. 1) Soak the air filter unit in cold or warm water and then lightly rinse it. f Do not use cleaning tools such as brushes.
-
Page 133: Replacing The Unit
The lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer for correct methods of disposal. Attention f Panasonic takes no responsibility for any damage or malfunction of the product resulting from use of lamp units which are not manufactured by Panasonic. Use only specified lamp units. - Page 134 Chapter 5 Maintenance — Maintenance/replacement f If the lamp unit is not installed properly, remove it and then push it in slowly. Pushing it in quickly or forcibly may break the connector. Lamp unit fixing screws Lamp cover Lamp cover fixing screw Lamp unit Handles Fig.
- Page 135 Chapter 5 Maintenance — Maintenance/replacement Note f If you use the projector without attaching the air filter unit, the filter indicator <FILTER> flashes in red and the message appears on the projected image for approximately 30 seconds. ENGLISH - 135...
-
Page 136: Troubleshooting
Chapter 5 Maintenance — Troubleshooting Troubleshooting Review the following points. For details, see the corresponding pages. Problems Points to be checked Page f Is the power plug firmly inserted into the outlet? ― f Is the <MAIN POWER> switch set to <OFF>? f Is the wall outlet supplying electricity? ―... - Page 137 Chapter 5 Maintenance — Troubleshooting Problems Points to be checked Page Video from HDMI f Is the HDMI cable connected securely? compatible device does f Turn off and on the power of the projector and the external device. ― not appear or it appears f Is a signal which is not compatible with the projector being input? jumbled.
-
Page 138: Chapter 6 Appendix
Appendix Chapter 6 This chapter describes specifications for the projector. 138 - ENGLISH... -
Page 139: Technical Information
Input selection list query 11 12 21 31 32 33 34 Returns the name set in [PROJECTOR NAME] of [NETWORK NAME? Projector name query xxxxx SETUP]. Manufacturer name INF1? Panasonic Returns manufacturer name. query EZ770 INF2? Model name query EW730 Returns model name. -
Page 140: Control Commands Via Lan
“xxxxxx:yyyyy:zzzzzzzz” xxxxxx Administrator rights user name for the web control (default user name is “admin1”) yyyyy Password of above administrator rights user (default password is “panasonic”) zzzzzzzz 8-byte random number obtained in Step 2) Command transmission method Transmit using the following command formats. -
Page 141: Error Response
Chapter 6 Appendix — Technical information When web control administrator rights password is not set (Non-protect mode) Connecting Obtain the IP address and port number (Initial set value = 1024) of the projector and request for a connection to the projector. f You can obtain both the IP address and the port number from the menu screen of the projector. -
Page 142: Serial In> Terminal
Chapter 6 Appendix — Technical information <SERIAL IN> terminal The <SERIAL IN> terminal of the projector conforms with RS-232C so that the projector can be connected to and controlled from a computer. Connection When connecting directly Projector connecting terminals Computer D-Sub 9p (female) D-Sub 9p (male) Communication cable (straight) When connecting with DIGITAL LINK compatible devices... -
Page 143: Basic Format
Chapter 6 Appendix — Technical information Basic format Transmission from the computer starts with STX, then the ID, command, parameter, and ETX are sent in this order. Add parameters according to the details of control. ID designate ZZ, 01 to 64 (2 bytes) End (1 byte) Parameter (undefined length) -
Page 144: Control Command
Chapter 6 Appendix — Technical information Cable specification When connected to a computer NC NC Projector Computer NC NC (<SERIAL IN> terminal) (DTE specifications) NC NC NC NC Control command The following table lists the commands that can be used to control the projector using a computer. r Projector control command Command Details... -
Page 145: Remote 2 In> Terminal
Chapter 6 Appendix — Technical information r Lens control command Command Sub command Details Remark LNSI2 Lens H shift +00000=Fine adjustment 1+, +00001=Fine adjustment 1-, LNSI3 Lens V shift +00100=Fine adjustment 2+, +00101=Fine adjustment 2-, LNSI4 Lens focus +00200=Coarse adjustment+, +00201=Coarse adjustment- LNSI5 Lens zoom <REMOTE 2 IN>... -
Page 146: Two-Window Display Combination List
Chapter 6 Appendix — Technical information Two-window display combination list Sub window RGB1 RGB2 VIDEO Still Still Main window Movie Movie Video image image Still image signal ― ― RGB1 input Movie-based ― ― signal Still image signal ― ― ― ―... -
Page 147: [Menu Lock Password] Operations
Chapter 6 Appendix — Technical information l: P IN P (picture in picture) combination is possible a: P IN P combination is possible on the following conditions. (Image on a sub window may be disrupted.) f The P IN P signals have the same vertical scanning frequency. f P IN P combination has signals other than the combination of Interlace signals by Interlace signals. -
Page 148: List Of Compatible Signals
Chapter 6 Appendix — Technical information List of compatible signals The following table specifies the video signals compatible with the projector. f Symbols that indicate formats are as follows. g V: VIDEO, Y/C g R: RGB g Y: YC g D: DVI-D g H: HDMI g DP: DisplayPort Scanning freq. - Page 149 Note f The number of display dots for PT-EZ770Z is 1 920 x 1 200. The number of display dots for PT-EW730Z is 1 280 x 800. The number of display dots for PT-EX800Z is 1 024 x 768. A signal with a different resolution is converted to the number of display dots.
- Page 150 Chapter 6 Appendix — Technical information f If connecting the projector to a computer that uses an early-type chipset or graphics card compatible with DisplayPort, the projector or computer may not be operated properly when the signal output from DisplayPort on the computer is input to the projector. In such a case, switch off the projector or computer and then switch it on.
-
Page 151: Specifications
5 000:1 (when [IRIS] is set to [ON], and [LAMP POWER] is set to [AUTO]) Color system 7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60) Projected image size 1.02 m (40") - 10.16 m (400") PT-EZ770Z, PT-EW730Z 16:10 Screen aspect ratio PT-EX800Z Projection method [FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR] Speaker 3.7 cm, round, x 1... - Page 152 For Y/C signal Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz Horizontal: 15 kHz - 100 kHz, Vertical: 24 Hz - 120 Hz PIAS (Panasonic Intelligent Auto Scanning) system For RGB signal f Dot clock frequency: 162 MHz or less...
- Page 153 Chapter 6 Appendix — Specifications r Terminal 1 set, high-density D-Sub 15 p (female) RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω) TTL high impedance, automatic positive/negative SYNC/HD <RGB 1 IN> terminal polarity compatible TTL high impedance, automatic positive/negative polarity compatible signal...
-
Page 154: Dimensions
Chapter 6 Appendix — Dimensions Dimensions Unit: mm 225.5 (8-7/8") 281.9 (11-3/32") 265 (10-7/16") 451 (17-3/4") 530 (20-7/8") * The above dimensions are obtained when the standard zoom lens is attached. * Dimensions vary for each product. 154 - ENGLISH... -
Page 155: Precautions For Ceiling Mount Bracket
Ask a qualified technician to do the installation work such as mounting the projector on the ceiling. f Panasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not manufactured by Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired. -
Page 156: Index
Index Index Freeze function [PROJECTION METHOD] Function button Projector body Accessories <FUNCTION> button [PROJECTOR ID] <AC IN> terminal 27, 47 Remote control 26, 57 [PROJECTOR SETUP] 62, 88 Adjusting adjustable feet [FUNCTION BUTTON] Protecting the registered signal Adjusting the volume [P-TIMER] [ADVANCED MENU] 61, 74... - Page 157 Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. Panasonic Corporation Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 2013 W1113TI1113 -YI...