Technical Data - Husqvarna 323C Operator's Manual

Technical data

Engine
3
Cylinder volume, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 9,0/4,1
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear,
measured according to ANSI B175.3-1997, dB(A), min/
max:
Vibration levels
Vibration levels at handles, measured according to ANSI
2
B175.3-1997, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting
equipment fitted. The table indicates the highest and lowest values.
22 –
English
TECHNICAL DATA
323L
1,50/24,5
1,34/34,0
1,06/27
2700
11000-11700
8014
0,9/9000
No
No
WalbroMB/SEM
AM49
Champion RCJ 7Y
0,02/0,5
Zama C1Q
1,06/0,5
91/97
1,8/1,4
2,8/1,8
2,7/5,2
7,2/9,8
323L (USA) 325Cx
1,50/24,5 1,50/24,5
1,34/34,0 1,34/34,0
1,06/27 1,06/27
2700 2700
11000-11700 11000-11700
8014 11700
0,9/9000 0,9/9000
Yes Yes
No No
WalbroMB/SEM WalbroMB/SEM
AM49 AM49
Champion RCJ 6Y Champion RCJ
7Y
0,02/0,5 0,02/0,5
Zama C1Q Zama C1Q
1,06/0,5 1,06/0,5
9,0/4,1 9,3/4,2
91/97 92/97
1,8/1,4 2,5/2,1
2,8/1,8 3,2/2,2
2,7/5,2 4,4/4,2
7,2/9,8 6,2/8,4