Using The Remote Control; Installing Batteries - Asus TV Box User Manual

Using the Remote Control

The Remote Control (optional accessory) allows you to operate the VCR at
a distance. It has all the major controls necessary for operating your TV
Box, such as turning your TV Box on/off, viewing the TV, and changing the
channels and volume. Aim the front of the Remote Control at the Remote
Control Receiver and press the control buttons as you would on the ASUS
Tuner Panel (see Using the ASUS Tuner Panel). Make sure that the
batteries have been properly installed first.
The remote control sensor or receiver may be
placed anywhere, as long as it is not blocked

Installing Batteries

Install the batteries included with your TV Box.
+ UM-4 –
AAA
– +
R03,1.5V
Slide Slide
Off On
1 Press down on the
as shown.
2 Insert the batteries, matching their polarities (
markings inside the Remote Control.
If the Remote Control does not operate or fails to function normally,
replace the batteries. The Remote Control operates on two AAA (UM-
4) 1.5 volt batteries, available at most stores, such as electronics and
camera stores.
8 ASUS TV Box
Press Down
Battery Cover
mark and then slide the battery cover off
+ –
and ) to the