Connections Manager; To Access The Connections Manager - Honeywell Dolphin 6110 User Manual
Mobile computer with windows embedded handheld 6.5
Hide thumbs
Also See for Dolphin 6110:
- User manual (72 pages) ,
- Quick start manual (12 pages) ,
- Operations & installation manual (13 pages)
Table of Contents
Advertisement
1. Verify that beam settings are set to receive. Tap
the box.
Connections Manager
Microsoft's Connections Manager sets up multiple network connections to Internet Service Providers
(ISPs) via external modem.
Do NOT enter connection parameters in the Connections Manager if:
• you are using one of the on-board wireless radios to connect to a network. The Dolphin terminal uses
the settings from each radio's configuration utility to connect. The connections manager is used
primarily to setup WAN modem dial up connections.
• you are using Wireless Zero Config. By default, WZC is disabled on Dolphin terminals.
To Access the Connections Manager
Tap
> Settings > Connections
8 - 4
> Settings > Connections > Beam and check
> Connections
.
Advertisement
Table of Contents
