Installation Of The Appliance; Transporting The Appliance; Removing The Transit Packaging - AEG LAVAMAT W 1050 ELECTRONIC User Information

Installation of the appliance

Washing machines with curved panels are not suitable for installing
3
under units.

Transporting the appliance

• Do not place the washing machine on its front or on its right side
(viewed from the front). Otherwise, electrical components can get
wet.
• Never transport the unit without the transport safeguard. Do not
remove the transport safeguard until the appliance is at the installa-
tion location. Transporting the unit without the transport safeguard
can damage it.
• Lift the appliance neither by an open filling door nor by the base.
• When transporting the unit with a sack trolley: Attach the sack trol-
ley only at the side.

Removing the transit packaging

Important! Before using the appli-
ance for the first time, all parts of
the transit packaging must be re-
moved! Keep the transit packaging
in a safe place, in case it is needed at
a later date when the appliance is to
be moved (e.g. moving house).
1. At the back of the appliance, open
both hose clips and remove both
hoses and mains cable.
2. Remove both hose clips from the ap-
pliance by jerking them hard.
Installation and connection instructions
37