Rear Brake Pedal Height Adjustment; Brake Light Switch Adjustment - Yamaha XVS1100 Owner's Manual

Drag star 1999
Hide thumbs Also See for XVS1100:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
a. Pedal height
Rear brake pedal height
adjustment
The top of the brake pedal should be
positioned 82 mm above the top of the
6
footrest. If not, ask a Yamaha dealer to
adjust it.
WARNING
@
A soft or spongy feeling in the brake
pedal can indicate the presence of
air in the brake system. This air
must be removed by bleeding the
brake system before the motorcycle
is operated. Air in the system will
cause greatly diminished braking
capability and can result in loss of
EAU01746
control and an accident. Have a
Yamaha dealer inspect and bleed
the system if necessary.
@
EW000109
1. Brake light switch
2. Adjusting nut

Brake light switch adjustment

The rear brake light switch is activated
by the brake pedal and is properly ad-
justed when the brake light comes on
just before braking takes effect. To ad-
just the rear brake light switch, hold the
switch body so it does not rotate while
turning the adjusting nut.
Turn the adjusting nut in direction a to
make the brake light come on earlier.
Turn the adjusting nut in direction b to
make the brake light come on later.
6-17
EAU00713

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Drag star xvs1100

Table of Contents