Specifications - Pioneer SPH-DA01 Important Information For The User

Appendix

Specifications

General
Rated power source ............... 14.4 V DC
Grounding system ................... Negative type
Maximum current consumption
........................................... 12.0 A
Dimensions (W × H × D):
Chassis ............................... 178 mm × 100 mm ×
Nose ..................................... 171 mm × 97 mm × 19 mm
Weight .......................................... 1.45 kg (3.2 lbs)
Display
Screen size/aspect ratio ....... 6.1 inch wide/16:9
Pixels ............................................. 384 000 (800 × 480)
Display method ........................ TFT Active matrix driving
Backlight ..................................... LED
Color system .............................. PAL/NTSC compatible
Tolerable temperature range:
Power on ............................ +14 °F to +140 °F
Power off ............................ –4 °F to +158 °F
Audio
Maximum power output ....... 50 W × 4
Continuous power output ... 15 W × 4 (FM, 1 %THD, 4 W
Load impedance ...................... 4 W (4 W to 8 W [2 W for 1 ch]
Preout output level (max) .... 2.0 V
Preout impedance .................. 100 W
Equalizer (3-Band Parametric Equalizer):
Frequency
Low ............................. 60 Hz/80 Hz/100 Hz/200 Hz
Mid ............................. 500 Hz/1 kHz/1.5 kHz/2.5 kHz
High ........................... 10 kHz/12.5 kHz/15 kHz/
Gain ...................................... ±15 dB
Subwoofer:
Frequency .......................... 80 Hz/120 Hz/160 Hz
Gain ...................................... ±12 dB
USB
USB standard spec. ............... USB 1.1 Full Speed
Max current supply ................. 1 A
(allowable voltage range:
12.0 V to 14.4 V DC)
165 mm
(7 in. × 3-7/8 in. × 6-1/2 in.)
(6-3/4 in. × 3-7/8 in. ×
3/4 in.)
(effective display area:
136.2 mm × 72 mm)
50 W × 2 ch/4 W + 70 W ×
1 ch/2 W (for subwoofer)
LOAD)
allowable)
17.5 kHz
USB class .................................... for iPhone only
Bluetooth
Version .......................................... Bluetooth 2.1+EDR
Output power ............................ +0 dBm Max.
FM tuner
Frequency range ...................... 87.9 MHz to 107.9 MHz
Usable sensitivity ..................... 17 dBf (0.8 µV/75 W, mono,
Signal-to-noise ratio ............... 57 dB (IEC-A network)
Distortion ..................................... 1.3 % (at 65 dBf, 1 kHz,
Frequency response ............... 100 Hz to 10 000 Hz (+2 dB/
Stereo separation .................... 31 dB (at 65 dBf, 1 kHz)
AM tuner
Frequency range ...................... 530 kHz to 1 710 kHz
Usable sensitivity ..................... 32 dBµV (S/N: 20 dB)
Signal-to-noise ratio ............... 57 dB (IEC-A network)
GPS
GPS receiver:
System ................................ L1, C/Acode GPS
Reception system .......... 22 tracking/66 acquisition-
Reception frequency .... 1 575.42 MHz
Tracking sensitivity ........ –165 dBm (typ)
Frequency .......................... Max. 10 a second (10 Hz)
GPS antenna:
Antenna ............................. Micro strip flat antenna/
Antenna cable ................. 3.0 m (9.84 ft.)
Dimensions (W × H × D)
........................................... 50.6 mm × 15.5 mm ×
Weight ................................ 85 g (0.19 lbs)
SD
microSD card, microSDHC card
Compatible physical format
..................................................... Version 2.00
File system .................................. FAT16, FAT32
Decoding format ...................... Software Update only
S/N: 30 dB)
stereo)
0.3 % (at 65 dBf, 1 kHz,
mono)
–13 dB)
(10 kHz)
channel system
right-handed helical polari-
zation
50.6 mm
(1.99 in. × 0.61 in. ×
1.99 in.)
En
Appendix
11