Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG C65301K
Summary of Contents for AEG C65301K
- Page 1 C65301K Glaskeramik-Kochfeld Glaskeramische kookplaat Table de cuisson vetrocéramique Ceramic glass hob Montage- und Gebrauchsanweisung Montage- en gebruikshandleiding Instructions de montage et mode d’emploi Installation and Operating Instructions...
-
Page 2: Dear Customer
Dear Customer, Please read these operating instructions carefully. Above all, please observe the “safety” section on the first few pages. Please retain these operating instructions for future reference. Pass them on to any subsequent owners of the appliance. The warning triangle and/or key words (Warning!, Caution!, Important!) are used to highlight instructions that are im- portant for your safety or for the function of the appliance. -
Page 3: Table Of Contents
CONTENTS Operating Instructions ........79 Safety . - Page 4 Installation Instructions ........107 Technical Data ..........107 Regulations, Standards, Directives .
-
Page 5: Operating Instructions
Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. If your appliance needs repairing, please contact your local AEG customer center or your dealer. Please follow these instructions, otherwise the warranty is void in the event of damages. -
Page 6: Safety During Use
Operating Instructions Safety During Use • This appliance may only be used for normal cooking and frying in the home. It is not designed for commercial or industrial purposes. • Do not use the hob to heat the room. • Take care when plugging electric appliances into mains sockets near the hob. -
Page 7: To Avoid Damaging Your Appliance
Operating Instructions To Avoid damaging your appliance • Do not use the hob as a work surface or for storage. • Do not operate the cooking zones when there is no pan or the pans are empty. • Glass ceramic is insensitve to temperature shock and very robust; however it is not unbreakable. -
Page 8: Disposal
Operating Instructions Disposal Disposing of the packaging material • All parts of the packaging can be fully recycled; foil and expanded polyurethane parts are appropriately identified. Please dispose of packaging material and, if appropriate, your old appliance properly. • Please follow the national and regional regulations and material identification (material separation, refuse collection, waste disposal sites). -
Page 9: The Key Features Of Your Appliance
Operating Instructions The Key Features of Your Appliance • Glass ceramic cooking surface: The appliance has a glass ceramic cooking surface and 4 rapid response cooking zones. The particularly powerful radiant heater elements significantly shorten the amount of time taken for the zones to heat up. •... -
Page 10: Discription Of The Hob
Operating Instructions Discription of the hob Casserole zone Single ring cooking zone 2400W 1200W Single ring cooking zone Triple ring cooking zone Control panel 1200W 2300W Casserole zone indicator „Timer“ with control display Booster button Button „Stop+Go“ Triple ring Heat setting Cooking zone selection with Mains button indicator... -
Page 11: Digital Display
Operating Instructions Digital Display The four display fields correspond to the four cooking zones, and give the following indications: – ”-“, when switched on, and when switched off automatically by the safety function, – ”0. “ , when a cooking zone is selected, –... -
Page 12: Before Using For The First Time
Operating Instructions Before Using for the First Time Initial Cleaning Wipe the glass ceramic surface with a damp cloth. Important: Do not use any caustic, abrasive cleaners! The surface could be damaged. -
Page 13: Operating The Hob
Operating Instructions Operating the Hob When a cooking zone is switched on, it may hum briefly. This is a char- acteristic of all glass ceramic cooking zones and does not impair either the function or the life of the appliance. TOUCH CONTROL Sensor Field To operate the TOUCH CONTROL sensor field place your finger from above flat onto the required field until the appropriate displays come... -
Page 14: Switching Off The Appliance
Operating Instructions Switching Off the Appliance To switch off the appliance completely activate the “On/Off” n sensor field. Touch the “On/Off” sensor field for approx. 1 second. When an individual cooking zone or the entire hob is switched off, any residual heat is shown with an h (for “Hot”) in the digital display for the appropriate cooking zones. -
Page 15: Heat Setting Selection + And
Operating Instructions Heat Setting Selection For setting and adjusting the heat setting (V bis 9. ) ffor the selected cooking zone. Use sensor field + to increase the heat setting. Lower the heat setting with sensor field -. If several cooking zones are being used simultaneously, the required cooking zone must be selected by touching the appropriate sensor field before adjusting the heat setting. -
Page 16: Switching The Casserole Zone On And Off
Operating Instructions Switching the Casserole Zone On and Off 1. Select the appropriate cooking zone. 2. Set the required heat setting. 3. To switch the casserole zone on or off place your finger flat on the “booster” touch control sensor field, until the control indicator comes on or goes off. -
Page 17: Switching The Triple Ring Cooking Zone On And Off
Operating Instructions Switching the Triple Ring Cooking Zone On and Off Depending on the size of the pot or pan, when using the triple ring cooking zone each of the larger cooking rings can be switched on in turn, in addition to the smallest cooking zone, using the “booster” sen- sor field on the control panel. - Page 18 Operating Instructions 3. Touch the “booster” sensor field. The middle ring is switched on. The control indicator under the symbol II is illuminated. 4. Touching the “booster” sensor field again activates the outer heating ring. The control indicator under symbol III is illuminated. 5.
-
Page 19: Stop+Go Function
Operating Instructions Stop+Go Function By touching the "Stop+Go" sensor field, all cooking zones in use can be switched simultaneously to the "keep warm“ setting. The "keep warm“ setting is indicated on the display by a symbol. If the "Stop+Go" sensor field is touched again, the previously selected settings are restored. -
Page 20: Switching Off A Cooking Zone
Operating Instructions Switching off a Cooking Zone 1. Select the required cooking zone with the cooking zone sensor fields. 2. Touch sensor fields + and - simultaneously to switch off or turn sen- sor field - back to zero. A cooking zone may only be switched off when the decimal point is on in the cooking zone display. -
Page 21: Residual Heat Indicator
Operating Instructions Residual Heat Indicator When an individual cooking zone or the entire hob is switched off, any residual heat is shown with an h (for “Hot”) in the digital display for the appropriate cooking zones. Even after the cooking zone has been switched off, the residual heat indicator only goes out when the cooking zone is cold. -
Page 22: Cooking With The Automatic Warm Up Function
Operating Instructions Cooking with the Automatic Warm up Function All four of the hob's cooking zones can be controlled in nine stages and have an automatic warm up function: – !, lowest heat setting – ), highest heat setting – a, automatic warm up function When you select the required heat setting using the + sensor field, the cooking zone will work for a specific time on full power and then switch automatically to the set heat setting. -
Page 23: Cooking Without The Automatic Warm Up Function
Operating Instructions If during the automatic warm up function you select a higher setting, eg. from # to %, the warm up time is adjusted to match. If you select a lower setting, the warm up time ends at once. If you start cooking again on a cooking zone that is still warm, the au- tomatic warm up function uses the residual heat. -
Page 24: Timer
Operating Instructions Timer A cooking duration can be set with the integrated timer for all cooking zones. When the end of the cooking duration is reached, the cooking zone switches itself off automatically. 1. Using the cooking zone sensor field, select the required cooking zone and set the required heat setting. - Page 25 Operating Instructions To set the timer more quickly, leave your finger on the + or - sensor field until the required time is reached. If the - sensor field is operated first, the time setting will begin at 99 minutes; if the + sensor field is operated first, the time setting will begin at 1 minute.
-
Page 26: Uses, Tables And Tips
Operating Instructions Uses, Tables and Tips Pans The better the pan, the better the results. • You can recognise good pans by their bases. The base should be as thick and flat as possible. • Pay particular attention when buying new pans to the diameter of the base. -
Page 27: Advice On Cooking With And Without Automatic Warm Up
Operating Instructions Advice on Cooking with and without Automatic Warm up The automatic warm up function is suitable for: • dishes that start off cold, are heated up at high power and do not need to be continually watched when cooking on the selected heat setting, •... -
Page 28: Typical Heat Settings
Operating Instructions Typical Heat Settings The information given in the following tables is for guidance. The heat setting required for cooking depends on the quality of the pans and on the type and quantity of food. Automatic Warm Up Switch Cooking Examples of Usage Setting... -
Page 29: Cleaning And Care
Operating Instructions Cleaning and Care Important: Cleaning agents must not come into contact with the hot glass ceramic surface! All cleaning agents must be removed with plenty of clean water after cleaning because they can have a caustic effect when the rings are next heated! Do not use any aggressive cleaners such as grill or oven sprays, coarse scourers or abrasive pan cleaners. -
Page 30: Hob Frame
Operating Instructions Problem Dirt 1. Remove burnt-on sugar, melted plas- tic, aluminium foil or other meltable materials with a glass scraper imme- diately and while still hot. Important: There is a risk of burning yourself when the glass scraper is used on a hot cooking zone! 2. -
Page 31: What Do I Do If
Operating Instructions What do I do if ... Rectifying faults It is possible that faults have been caused by a minor error, which you can correct yourself with the help of the following instructions. Do not attempt any further repairs if the following instructions do not help in each specific case. - Page 32 Operating Instructions ..after switching off the cooking zones, neither j nor h for re- sidual heat appears in the display? Check whether – the cooking zone was only used for a short period and is therefore not hot enough. If the cooking zone is hot, call the customer service.
-
Page 33: Installation Instructions
Installation Instructions Installation Instructions Important! The new appliance may only be installed and connected by a registered specialist. Please observe this instruction, otherwise the warranty will not cover any damage that may occur. Technical Data Appliance dimensions Width 572 mm Depth 502 mm Height... - Page 34 Installation Instructions Regulations, Standards, Directives This appliance meets the following standards: • EN 60 335-1 and EN 60 335-2-6 relating to the safety of electrical appliances for household use and similar purposes and • EN 60350, or DIN 44546 / 44547 / 44548 relating to the operating features of electric cookers for household use.
-
Page 35: Safety Instructions For The Installer
Installation Instructions Safety Instructions for the Installer • A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm. Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors. -
Page 36: Electrical Connection
Installation Instructions Electrical Connection Before connecting, check that the nominal voltage of the appliance, that is the voltage stated on the rating plate, corresponds to the avail- able supply voltage. The rating plate is located on the lower casing of the hob. - Page 37 Installation Instructions...
- Page 38 Service Service In the “What to do if …” section a number of malfunctions are listed that you can rectify yourself Look there first if a fault occurs. Is it a technical fault? If so, please contact your customer service centre. (You will find addres- ses and telephone numbers in the section “Customer Service Centres”.) Always prepare in advance for the discussion.
- Page 39 Montage/Assembly Montage/Assembly...
- Page 40 Montage/Assembly min. 25 mm min. 5 mm Ausbau, Demontage, Removal...