Table of Contents
Advertisement
No Tank
Bracket
Left hand leg assembly
1. Turn leg assembly upside down as
shown and insert caster plug.
Make sure caster plug tab is in line with
notch in leg.
2. Turn leg assembly over and tap on a hard surface
until the caster plugs are fully seated.
Locking Caster
3. Insert locking casters into the caster plugs on front of leg
assemblies and press in until caster is fully seated as shown
ASSEMBLY
Tank
Bracket
Right hand leg assembly
Non-Locking Caster
Tab
Notch
Console mounting
tabs are on front
side of leg
.
assemblies.
4. Insert non-locking casters into the caster plugs
on rear of leg assembiles.
7
Caster Plug
Leg Assembly
(Left Hand shown)
Advertisement
Table of Contents
