Maintenance And Care; Attention; Changing The Light Bulb; Cleaning - AEG 240 D Operating And Installation Instructions

Maintenance and care

• The hood must always be disconnected from the mains power
supply before beginning any maintenance work.

Attention

• Failure to observe the instructions on cleaning the unit and
changing the filters will cause a fire hazard. You are therefore
strongly recommended to follow these instructions.

Changing the light bulb

• Disconnect the unit from the mains power supply.
• Open the metal grease filter.
• Replace the faulty lamp with one of equal kind and rating.
• If the light does not come on, make sure the bulb has been
screwed in correctly before contacting the technical assistance
service.

Cleaning

• Warning: always disconnect the hood from the mains power supply
before cleaning it.
Never insert pointed objects in the motor's protective grid.
• Wash the outside surfaces using a delicate detergent solution.
Never use caustic detergents or abrasive brushes or powders.
• Only ever clean the switch panel and filter grille using a damp cloth
and delicate detergents.
• It is extremely important to clean the unit and change the filters at
the recommended intervals. Failure to do so will cause grease
deposits to build up that could constitute a fire hazard.
86