Sharp PW-AT750 Quick Reference Manual

Layout
Display (Main display)
Global search key
(Searching through several
dictionaries is possible.)
Power on/off key
Earphone jack (side)
Function key
Volume control (side)
Utility keys for dictionaries
and functions
(S-jump, quick reference, example/note,
audio, switch, bookmark, preview, illustrations/
diagrams/notes, playing speed, word list)
Speaker
Font size shift (zoom) keys
Using the PW-AT750 for the first time
Insert the batteries using the procedure below before using the
PW-AT750 for the first time.
To insert the batteries
1
Set the battery replacement switch on
the bottom of the unit to the "
" position.
2
Remove the battery cover as shown
in the diagram.
3
Insert the batteries included with the
unit.
Make sure the battery polarity is correct.
• Insert the batteries over the ribbon
tab being sure not to cover the end
of the tab.
4
Replace the battery cover as shown in
the diagram.
5
Set the battery replacement switch to
the " " position.
6
Open the unit and press to turn
the power on.
The calibration screen
for the handwriting pad
appears.
Main display Handwriting pad
ELECTRONIC DICTIONARY
PW-AT750
QUICK REFERENCE
Dictionary/function selection keys
Menu (Menu customize) key
Stylus holder (side)
Card key
Clear key
Back space (delete) key
Card slot (side)
Cursor keys
Page scroll keys
Escape key
Search/enter (store) key
Handwriting pad
• If the power cannot be turned on:
• Make sure the battery replacement switch is in the "
" position, then press again.
• If the power still cannot be switched on, try performing steps
1 through 6 in the above procedure again.
7
Pull out the stylus, extend it, and use it to accurately touch the
center of the "+" character displayed on the handwriting pad.
• Touch the center of the "+" character as it appears in four
different locations.
The LCD contrast adjustment screen appears.
8
Adjust the LCD contrast of the main display using
and ( ).
9
The LCD contrast of the handwriting pad can be
adjusted by touching and displayed on
the pad.
10
When done, press .
The key sound (beep) on/off screen appears.
11
Select or to turn the key sound on/off.
Kana input screen appears.
12
Press to select alphabet character input or press
Japanese input.
Using the handwriting pad
Parts and functions
The handwriting pad is set to enter characters when the cursor is in
any part of the character entry area.
Candidate list display area
{
Indicator showing
types of characters
that are entered
button
Writing area
Entering characters using the pad
You can enter a character of an unknown Japanese word by tracing
it, then look it up in the dictionary.
Example: Look up an unknown Japanese word "
in the Japanese-English dictionary.
1
Press .
The entry/selection screen of
with the cursor placed over the spelling entry area.
The handwriting pad is set to the English character entry mode.
2
Press to move the cursor to the Japanese entry area.
The handwriting pad is now switched to enter kanji and kana.
Selecting a dictionary/function in the
menu display
Press .
The menu display (dictionaries/functions selection display) appears.
The menu display (dictionaries/functions selection display)
{
Classified
menu
( ) Menu operation
The menu display consists of a list of classified menu items each with
a two digit alphanumeric character (
When you press to open the menu display, "
(Japanese dictionary)" is selected and the color of the number is
inverted (black and white reversed).
Press or to move the cursor (indicated by the color-inverted
number) and choose a different dictionary/function.
Individual menu items of each classified menu are displayed on the
right.
to select
3
Use the stylus to draw "
The character shown in the candidate list display area is also
placed in the entry area so that the dictionary search can proceed.
button
button
button
4
If the character in the entry area is not the one you desired,
use the stylus to touch and select the desired character in the
list.
The character in the entry area changes.
"
• If you cannot find the character in the list, touch
& appears,
to erase it and reenter it on the pad.
5
Likewise, enter "
When you start drawing, the previous entry is confirmed then
erased.
Selecting a menu item
●
Select using the cursor keys and
1
Move the cursor (color-inverted) using
menu you wish to choose and press
• To return the cursor to the classified menu, press .
2
Move the cursor using
wish to use and press
The display of the dictionary/function you chose appears.
●
Select using alphanumeric keys
1
Press the keys (
Individual menu
number shown to the left of the classified menu ( ,
) you wish to choose.
The cursor will be displayed on the individual menu of the classified
menu you chose.
2
Press the alphanumeric key that corresponds to the characters
shown to the left of the dictionary/function you wish to use.
- ) to the left.
The display of the dictionary/function you chose appears.
• When the cursor is on an individual menu, return the cursor to
the classified menu by pressing
" on the handwriting pad.
or press
" in the entry area.
or to the classified
or .
or to the dictionary/function you
.
, , to ) that correspond to the
, to
or .