Sony VPL-FH500L Specifications page 3

Versatile installation projector
Hide thumbs Also See for VPL-FH500L:
Table of Contents

Advertisement

Twin-lamp System for Peace-of-mind Operation
The VPL-FH500L's twin-lamp system provides both peace-of-
mind and economical operation. One lamp can output a
total of 7,000 lumens but a second lamp is built in to provide
automatic backup should the primary lamp fail. The two
lamps are alternately used, achieving a recommended lamp
replacement time of up to 8,000 hours, saving maintenance
time and cost.
What happens if one lamp suddenly fails during an important presentation?
Installation Advantages
Lens Shift Function
The VPL-FH500L has a Lens Shift function which is controlled
from the projector control panel or the supplied Remote
Commander™ unit. Using this function, the position of the
projected image can be moved vertically by -113% to +113%
and horizontally by -63% to +63%. Images can be easily
adjusted to the desired settings during installation. With this
exceptional shift range, the VPL-FH500L can be installed in
a way to maximize performance even in the most difficult
environments.
Vertical range
Over 3 screens
100%
Screen center 1
Max. 113%
Screen center 2
V shift 50%
Sufficient V shift to ensure broad visibility
Variety of Optional Lenses Including Sony's Legacy Lenses
Various optional zoom lenses are available for the VPL-FH500L,
and these can be used for many different applications.
Centered Lens Design
The centered lens provides symmetry for a balanced
installation, and makes setup very simple.
Horizontal range
Over 2 screens
100%
Two Feet Functional Size
Max. 63%
The VPL-FH500L matches well with the
typical ceiling tile size and blends into
V shift 113%
the ceiling.
"Blend-in" Design
The VPL-FH500L showcases a newly designed low-profile
chassis, so the projector appears to blend into the ceiling or
wall on which it is mounted. The connector panel is located
on the front of the unit so its cables cannot be seen by the
audience.
Twin-lamp system image
Single-lamp system:
When there's a problem with the lamp,
the presentation has to stop.
Dual-lamp system:
When there's a problem with one lamp,
brightness is halved and
the presentation's impact is diminished.
Twin-lamp system:
Even when a lamp has a problem,
there is no worry to continue
the presentation.
Balanced and symmetrical installation
2 feet
3

Advertisement

Table of Contents
loading

Table of Contents