Familiarise Yourself With The Appliance; The Control Panel; The Hotplates; Residual Heat Indicator - Bosch PIF6..R14E Instruction Manual

Familiarise yourself with the appliance

These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.

The control panel

&RQWURO SDQHO IRU

The hotplates

Hotplate
Single hotplate
$
Single induction hotplate
$
Double radiation hotplate*
ð
Radiation broiler*
æ
* Activating the hotplate: The corresponding indicator lights up.
Use only cookware suitable for induction cooking on the induction hotplates, see the "Appropriate cookware" section.

Residual heat indicator

The hob has a residual heat indicator
which lights up when they are hot. Avoid touching them when
this indicator is lit.

Programming the hob

This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.

Switching the hotplate on and off

The range is turned on and off using the main switch.
To switch on: press the
%
main switch and the indicators light up. The range is ready
‹
for use.
To switch off: press the
%
hotplates are turned off. The residual heat indicator will remain
lit until the hotplates have cooled down sufficiently.
† VHOHFWLQJ
WKH KRWSODWH SRZHUERRVW IXQFWLRQ °
&RQWURO SDQHO
IRU
PDLQ
VZLWFK
Turning on and off
Always use cookware of a suitable size.
Always use cookware of a suitable size.
Press the
Press the
on each hotplate,
•
symbol. The indicator next to the
symbol until the indicators go out. All
&RQWURO SDQHOV IRU
,QGLFDWRUV IRU U WLPH SURJUDP
SRZHU OHYHO³É
IXQFWLRQ
IXQFWLRQDOLW\ ¯
,QGLFDWRUV IRU
U WLPH SURJUDP
UHVLGXDO KHDW ‡
IXQFWLRQ
&RQWURO SDQHO
WR
VHOHFW WKH SRZHU
OHYHO
symbol.
ð
symbol.
æ
The light will remain on while the hotplate is hot, even after
•
the hob has been turned off.
If the pan is removed before the hotplate is switched off, the
will appear and alternate with the selected power level.
Note: The range switches off automatically when all the
hotplates have been turned off for more than 20 seconds.

Set the hotplate

Select the required power level with the + and - symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
&RQWURO SDQHOV
IRU
' FKLOGSURRI
ORFN
Í GRXEOH
KRWSODWH
– URDVWLQJ
]RQH
•
5