Safety Considerations; For Your Safety; What To Do If Yo Smell Gas; Warnings - Bosch PCL985FAU User Instructions

Service
It is not always necessary to call the Service Centre. In
Trouble shooting
some cases, you may be able to solve the problem
chart
yourself. This table contains some useful information.
Important:
Only authorised personnel from the Service Centre are
qualified to work on the main gas and electric systems.
What´s wrong Possible cause
• Power turned off.
...If none of the electrical
systems work?
• Faulty fuse.
• The automatic circuit breaker
or mains differential has been
triggered.
...If the electronic ignition •There may be food or cleaning
system does not work? product particles between the
spark plugs and the burners.
•The burners are wet.
•The burner covers are not
positioned correctly.
...If the flame on the burners is •The burner components have
not evenly distributed? not been assembled properly.
•The gas ports on the burners
are dirty
• The burners may not be
totally dry.
...If the gas flow does not seem •The isolation valve is closed.
normal or there is no gas flow
at all?
•If the gas is supplied from a
gas bottle, it may be empty.
...If the kitchen smells of gas? •One of the valves has been
left open.
•Possible leak on the gas bottle.
coupling.
...If the safety cut-off devices •The control knob has not been
on the different burners do not kept pressed in for long
work? enough.
•The burner ports are dirty.
Any of the following are considered to be abnormal operation and may require
servicing:
Yellow tipping of the hob burner flame.
Sooting up of cooking utensils.
Burners not lighting properly.
Burners failing to remain alight.
Gas valves, which are difficult to turn in case the appliance fails to operate correctly,
contact the authorised service provider in your area.
19
Solution
• Turn power on.
• Check the fuse in the
main fuse box and
replace if faulty.
•Check to see if the circuit
breaker or a differential has
been triggered in the mains
supply box.
•The gap between the spark
plug and the burner needs to
be cleaned carefully.
•Dry the burner covers
carefully.
•Make sure that the burner
covers are correctly
positioned.
•Put the components in their
correct positions.
•Clean the gas ports on the
burners.
.
•Dry the burners more
thoroughly (be particularly
careful with single-piece
burners).
• Open the isolation valve.
•Replace the gas bottle with
a full one.
•Check to see if a valve has
been left open.
•Check that the coupling on
the gas bottle is in order.
•Once ignited, keep the
control pressed in for a few
seconds.
•Clean the burner ports.

Safety considerations

For your safety

What to do if you
smell gas
.

Warnings

•
If the information in this manual is not followed exactly, a
fire or explosion may result causing property damage, personal
injury or death.
• Do not store articles on or against this appliance.
• Do not store flammable material near this appliance.
• Do not spray aerosols in the vicinity of this appliance while
it is in operation.
• Do not try to light the appliance.
• Do not touch any electrical switch; do not use any phone
in your building.
• Inmediately call your gas supplier from a neighbour's phone.
Follow the gas supplier's instructions.
• If you cannot reach your gas supplier , call the fire department.
• Installation and service must be performed by an authorised
person.
1. Do not allow the flame to extend beyond the edge of the
cooking utensil. This instruction is based on safety considera-
tions.
2. Do not forget that the unit becomes hot when in use.
Common sense is important. Just because the flame is out,
does not mean parts cannot still be hot.
3. This appliance shall not be used for space heating.
This instruction is based on safety considerations.
4. Be sure to disconnect the electrical supply before disass-
embly of the appliance.
5. Keep the appliance area clear and free from combustible
materials, gasoline and other flammable vapours and liquids.
6. This appliance must be installed in a position with the proper
level of ventilation. Do not obstruct the flow of combustion and
ventilation air.
7. Cabinets installed above the gas cooktop must have a
minimum clearance of 650 mm (24").
8. The gas pressure regulator supplied with the appliance
must be installed in line with the gas pipe. (N.G. only)
9. For pressure testing in excess of 3.5 kPa (1/2 psig) the
appliance and its individual shutoff valve must be disconnected
from the gas suply piping system.
4