11. ON LINE MODE
11.2 DIAGNOSTIC TEST OPERATION AND TEST PRINT
In self test mode the printer status is printed in two types of sample print.
POWER LED
ON LINE LED
[FEED] key or [PAUSE] key
POWER LED
ON LINE LED
POWER LED
ON LINE LED
Power ON
ERROR LED
ERROR LED
[FEED] key
ERROR LED
11.2 DIAGNOSTIC TEST OPERATION AND TEST PRINT
Turn on the power while holding down the
[PAUSE] key.
Diagnostic test is started.
Diagnostic test is finished.
Select the print method
[FEED] key:
[PAUSE] key: Thermal direct print
The result of the Diagnostic test is
printed.
Press the [FEED] key.
Test print is started.
11- 3
EO1-33076
Thermal transfer print