Brother DCP-J125 User Manual page 196

Chapter 8
Note
• If Remove Red-Eye appears on the LCD,
press # to attempt to remove red-eye from
your photo.
• Press Clear to undo the effect.
e
Press OK and enter the number of
copies you want using the dial pad.
f
Do one of the following:
Press OK and change the print

settings. (See PhotoCapture
Center™ print settings on page 42.)
 If you do not want to change any
settings, press Colour Start to print.
Enhance Skin-Tone
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
colour in your photos and adjusts the image.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (PHOTO CAPTURE).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Enhance Skin.
Press OK.
e
Do one of the following:
Press OK if you do not want to

change any settings.
 Press a or b to adjust the effect level
manually.
Press OK when you have finished.
f
Enter the number of copies you want
using the dial pad.
38
g
Do one of the following:
Press OK and change the print

settings. (See PhotoCapture
Center™ print settings on page 42.)
 If you do not want to change any
settings, press Colour Start to print.
Enhance Scenery
Enhance Scenery is best used for adjusting
landscape photographs. It highlights green
and blue areas in your photo, so that the
landscape looks more sharp and vivid.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
8
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Enhance Scenery.
Press OK.
e
Do one of the following:
 Press OK if you do not want to
change any settings.
 Press a or b to adjust the effect level
manually.
Press OK when you have finished.
f
Enter the number of copies you want
using the dial pad.
g
Do one of the following:
Press OK and change the print

settings. (See PhotoCapture
Center™ print settings on page 42.)
 If you do not want to change any
settings, press Colour Start to print.
(PHOTO CAPTURE).
8