Installation And Connections; Before You Begin; Unpack Everything; Equipment Required - JVC VN-T216VPRU Instructions Manual

3 Installation and Connections

Before You Begin

Unpack Everything

Equipment Required

Operating Precautions

Do not install the camera in following places.

In a place with vapor or oil, for example in a kitchen.

When the ambient temperature rises above or falls below the acceptable range (from -10°C to

50 °C.
In a place at which corrosive gases are emitted.

Near a source of radiation, X-rays, strong radio waves or magnetism.

In a place subject to vibration.

In a place with excessive dirt.

This chapter describes the installation and connection of the camera that can
deliver video images and audio in real time using the Internet or an intranet.
Please read this guide carefully before you install and operate the camera.

FIXED HD IP DOME CAMERA

WARRANTY CARD

SAFETY PRECAUTIONS

QUICK GUIDE

2-PIN TERMINAL BLOCK for power input

8-PIN TERMINAL BLOCK for alarm input/output

CD-ROM containing INSTRUCTIONS and IP Finder software

TEMPLATE : mounting template

WRENCH : Hexagon screw driver

3 SCREW ANCHORs

3 SCREWs

SCREW (for WIRE)

WASHER (for WIRE)
The following tools might help you to complete the installation:

Drill

Screwdrivers

Wire cutters
9