Editing The Digitized Content - Silvercrest SKD 1000 A1 User Manual

loudest passages never reach or exceed the maximum level of 0 dB,
otherwise your recording will become clipped (overmodulated). The
"Maximum input level" displayed at the bottom of this section of the display
shows the maximum level measured during the entire recording. The
"Reset" button allows you to delete the stored maximum level and repeat
the recording with a lower level.
If necessary, adjust the level using the Volume Control knob (2) on your
digitizer.
5. Once you have digitized the desired tracks or the entire content of the
cassette, click on the "Pause" button to end the recording on the PC, and
then press the STOP button (11) on the cassette digitizer to stop the
playback.

Editing the digitized content

1. Click on the "Next" button at the bottom of the window to open the
"Restoration" tab, where you can edit your recording.
18
Cassette Digitizer SilverCrest SKD 1000 A1
English