JVC DT-V17G1Z Quick Manual

 3G and Dual Link equipped
SMPTE 424M/425M/372M
 JVC 10-bit video processing
 High operating viewing angle
 Waveform/Vector scope
 LTC & VITC support
 Gamma selection
 Various marker function
 Audio level meter up to 12ch
 Digital closed captioning
HIGHLIGHTS
 3G/Dual Link Equipped
1080p uncompressed digital video
data transmitted at a maximum
rate of 60 frames per second at 3
GB/second can be input with one
HD SDI Input. Dual Link is available
through two HD SDI inputs.
 IPS (In-Plane-Switching) LCD Panel
IPS panels with wide
viewing angles and low
chromatic variation
ensure minimal colour
change from different
viewing positions.
 Gamma Preset
Mode
JVC offers various
pre-set gamma modes
(2.2, 2.35, 2.45, 2.6)
to meet your application needs.
 Vector Scope*
High-quality vector scope allows
simple checking of hue and
saturation of digital video signals.
Hue and saturation of colour signal
are detected and displayed as
a vector with resolution of 254 x 254.
Compatible with video,
component, SDI (SD/HD), DVI
 3G-SDI Input Format
Following signal information can be displayed when
a 3G-SDI signal comes in.
3G A-1 Level A mapping structure 1
3G A-2 Level A mapping structure 2
3G A-3 Level A mapping structure 3
3G A-4 Level A mapping structure 4
3G B-DS1 Level B data stream 1
3G B-DS2 Level B data stream 2
3G B-DUAL Level B DUAL LINK
Viewing angles
Vector Scope
17" Multi-Format LCD Monitor
DT-V17G1Z
(except PC signals) input signals, and offers a double-size display** option
and selection of display position or translucence functions.
 Waveform*
Detects video, component (except RGB), SDI, DVI (except PC)
brightness signals and displays them with resolution of 360 x 254 for
SD signals or resolution of 480 x 254 for HD signals. Besides, it is also
Waveform
 Advanced Audio Level Meter
The channel number is displayed in each level bar. And, you can check
the status of the audio signal at a glance for Reference Level/Over Level
0 dB, three set levels, and peak hold function.
Audio Level Meter
Vector scope and waveform
cannot be displayed at
the same time.
possible to perform checks at
the colour signal level of each
colour per screen for R/G/B,
Y/P /P , Y/C /C . Over-level
B R B R
function enables peak brightness
to be checked at a glance.
The display allows a double-size
display** option, and selection of
display position or translucence
functions.
Over Level
Channel No.
1
2
3
Peak hold
4
5
6
Reference Level 0dB
*Two display sizes cannot be displayed at the same time.
**The position is fixed for double-size display.