Power Supplies - Dell PowerEdge C410x Hardware Owner's Manual

2.7. Power Supplies

In case of a power supply failure, you can quickly replace the power supply unit.
Follow these instructions to remove the power supply:
WARNING:
In order to reduce the risk of injury from electric shock, disconnect the failed
power supply from the AC power before removing it from the system.
1. Pull up the power supply handle.
2. Press the retaining clip on the right side of the power supply along the direction of the arrow.
3. At the same time, pull out the power supply by using its handle.
NOTE: The power supply takes considerable force to remove.
Follow these instructions to install the power supply:
Insert the replacement power supply firmly into the bay. The retaining clip should snap. Connect the AC
power cord to the replacement power supply.
18