GE RHM 100 Specifications

GE
Measurement & Control
RHM 100
Coriolis Mass Flowmeter
for High Flow Applications
The RHM 100 can measure flow rates up to 720
t/h (26,455 lb/min) with pressures up to 189 bar.
This large sized model is optimal for loading and
unloading applications - manufactured by GE's
Rheonik mass flowmeter experts.
Applications
• Loading of boats, vessels, rail tank wagons
• Highly viscous media (low pressure drop and
excellent performance at low flow conditions)
Features
• Suitable for pressure up to 189 bar
• Flow uncertainty down to 0.15%
• Density uncertainty down to 0.5%
• Repeatability better than 0.05%
• Unique torsion oscillator
• Typical measuring ranges from 300 to 12000 kg/
min
• Minimal flows as low as 200 kg/min
• Heavy duty version available (increased wall
thickness of measuring loops for additional safety)
• Customization possible
g
• Hazardous Area Approvals (ATEX, CSA, ...)
Advantages
• High flow rates for fast filling, in combination with
high operating pressure
• Torsion oscillator design assures most stable and
basically drift free measurement and increased
signal to noise ratio
• Not sensitive to changes in pressure
• Longest life time and increased safety (low stress
in welds and increased wall thickness against
abrasion)
• No moving parts, practically no maintenance