Call Forwarding From A Phantom Directory Number - Toshiba Strata DK 280 User Manual

Call Forwarding a Primary
or Phantom Directory
Number:
1. Press the
[PDN]
or
[PhDN]
that you want
to Call Forward.
[iii5ZF-]
1,;,,,
2. Enter a Call Forward
Access Code
(# 6 0 I- # 6 0 4).
[pTTGGGE]
mm.*
3. Dial the number to
which calls will forward.
4. Press Speed Dial
and then Spkr.
Call Forwarding a Primary and/or Phantom Directory Number
Your telephone has a Primary Directory Number
[PDN]
which can only be call
forwarded from your telephone.
To set call forward for a Phantom
[DN],
your phone must be programmed as the
owner of
[PhDNs].
Your telephone can be programmed to have up to eight
[PhDNs].
Up to eight
[PhDNs]
can be set to Call Forward by entering a specific access code, but only
four of them can have dedicated message waiting buttons/LEDs.
[PDNs]
and
[PhDNs] can be independently set for Call Forward-All Calls, Call Forward-Busy,
Call Forward-No Answer, and Call Forward-Busy/No Answer. Calls to your
[PDN]
or
[PhDN]
will be forwarded to the destination phone number according to
the call forwarding mode you have chosen.
You will hear a steady dial tone and see a steady LED.
#601 Call Forward-All Calls
#602 Call Forward-Busy
#603 Call Forward-No Answer
#604 Call Forward-Busy/No Answer
The dial tone will go silent, and the LED will flash intermittently.
The screen will display the number you are forwarding to and you will hear a
short, steady confirmation tone followed by a pulsing Re-order tone. The LED
will continue to flash intermittently.
The dial tone will go silent and the LED will go off. The LCD will display a
message indicating call forwarding, the call forward type, the Phantom Directory
Number that the call is being forwarded from, and the destination number to
which the call is forwarded.
22