Incoming Call Ringing Patterns; Feature Codes - Toshiba Strata DK User Manual

Features
Before You Begin
to answer the ringing call. Ringing Line Preference is enabled in system
programming.

Incoming Call Ringing Patterns

Your telephone ringing pattern is set in system programming.
Some systems may use the internal call ring pattern—one second ON, three seconds
OFF—for incoming outside calls.
A distinct outside call ring pattern—0.4 seconds ON, 0.2 seconds OFF, 0.4 seconds
ON, three seconds OFF—is available.

Feature Codes

Your telephone may not have all of the features mentioned in this guide. The
Appendix lists all of the feature codes that can be programmed for your telephone
system. See your System Administrator to find out which features and codes apply to
your telephone.
Some CO line features, such as conferencing, Centrex, or behind PBX operation
require "flashing the CO line," to dial Centrex/PBX feature access code or extension
numbers.
To flash a CO line
1. Access a CO line.
2. Press
3. You can now dial a
Centrex or PBX
feature access code or
extension number.
6
+
.
You hear Centrex or PBX dial tone.
Strata DK Digital Single Line Telephone 5/99