Advertisement
DESCRIPTION OF THE KETTLE
Parts Description
1. Spout
2. Lid
3. Water lever indicator
4. Handle
5. On/off button
6. Base with cord storage
OPERATION INSTRUCTIONS
•
Remove your kettle from the base and open the
lid.
•
Fill with water to the desired level.
•
Never filling the kettle with too much or too little
water as represented by the Maximum and
Minimum markings on the water level gauge will
result in poor operation, water leaking and spilling,
or injury.
•
Make sure the base is on a firm, level surface
before placing your kettle on it. Then push the
On/Off button Actuator down to On position. The
indicator light will illuminate to show the kettle is
switched on.
•
When the water has boiled, the kettle will
automatically turn itself off.
•
Pour hot water carefully. Pouring too fast will
result in splashing.
•
You can switch on the kettle again after allowing
the built-in thermal control switch enough time to
cool down (15~20 seconds).
Advertisement
