Zanussi ZFU20200WA User Manual
Zanussi ZFU20200WA User Manual

Zanussi ZFU20200WA User Manual

Hide thumbs Also See for ZFU20200WA:

Advertisement

User manual
EN
Freezer
ZFU20200WA

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZFU20200WA

  • Page 1 User manual Freezer ZFU20200WA...
  • Page 2: Table Of Contents

    • If this appliance featuring magnetic door seals is to replace an older appliance having www.zanussi.com...
  • Page 3 • Bulb lamps (if foreseen) used in this appli- if it is damaged. Report possible damages ance are special purpose lamps selected for immediately to the place you bought it. In that household appliances use only. They are not case retain packing. suitable for household room illumination. www.zanussi.com...
  • Page 4: Product Description

    • Connect to potable water supply only (If a the symbol are recyclable. water connection is foreseen). Service • Any electrical work required to do the servic- ing of the appliance should be carried out by a qualified electrician or competent person. Product description Control panel Flaps www.zanussi.com...
  • Page 5: Control Panel

    After 24 hours, when the freezing process is function at least 24 hours before placing the completed, deactivate the Fast Freezing func- food to be frozen in the freezer compartment. tion (see "Fast Freezing function"). Place the fresh food to be frozen in the top compartment. www.zanussi.com...
  • Page 6: First Use

    Before using the appliance for the first time, wash the interior and all internal accessories Important! Do not use detergents or abrasive with lukewarm water and some neutral soap so powders, as these will damage the finish. www.zanussi.com...
  • Page 7: Helpful Hints And Tips

    Caution! Unplug the appliance before thorized technicians. carrying out any maintenance operation. Periodic cleaning This appliance contains hydrocarbons in The equipment has to be cleaned regularly: its cooling unit; maintenance and recharg- www.zanussi.com...
  • Page 8: Troubleshooting

    The temperature is not set correct- Set a higher temperature. continually. The door is not closed correctly. Refer to "Closing the door". The door has been opened too fre- Do not keep the door open longer quently. than necessary. www.zanussi.com...
  • Page 9: Technical Data

    The technical information are situated in the rat- ing plate on the internal left side of the appli- ance and in the energy label. Installation operation of the appliance before installing the Caution! Read the "Safety Information" appliance. carefully for your safety and correct www.zanussi.com...
  • Page 10 “E“ or by the earth symbol or col- oured green and yellow. 2. Connect the wire coloured blue to the ter- minal either marked with the letter “N“ or coloured black. www.zanussi.com...
  • Page 11 • Remove the cap (2) and position it on the 4. Tighten again the screws. opposite side. • Unscrew and remove the lower hinges. (3) • . Remove the door. • Unscrew the upper pin (1) and place it on the opposite side. (2) • Refit the door. www.zanussi.com...
  • Page 12: Environmental Concerns

    By ensuring this product household waste disposal service or the shop is disposed of correctly, you will help prevent where you purchased the product. www.zanussi.com...
  • Page 13 www.zanussi.com...
  • Page 14 www.zanussi.com...
  • Page 15 www.zanussi.com...
  • Page 16 www.zanussi.com/shop...

Table of Contents