Adjusting your monitor image
This section describes the control features to adjustyour monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
Icon
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
To use the controls:
1. Press
2. Use
function. If there is a sub-menu, you can move between options using
press
3. Press
4. Press and hold
adjustments to the OSD. Press and hold
allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold the
seconds to disable / enable DDC/CI function. The words "DDC/CI disable"or"DDC/CI
enable" shows on the screen.
Control
Description
Input Change
Switches the video input source.
Press and hold for 10 seconds to enable or disable the
DDC-CI
DDC-CI function
Exit
Exit from menu
Image Setup
Activates automatic image adjustment.
Brightness
Direct access to Brightness adjustment.
Menu
Enter menu
to open the main OSD menu.
or
to move among the icons. Select an icon and press
to select that function. Use
to move backwards through the sub-menus and exit from the OSD.
for 10 seconds to lock the OSD. This will prevent accidental
to access that
or
to make adjustments. Press
for 10 seconds to unlock the OSD and
or
, then
to save.
button for 10
Chapter 2. 2-3