Before Powering The Unit On - Mitsubishi Electric DX-TL4509E Quick Start Manual

Before Powering the Unit ON:

Before you turn on the DVR and begin SETUP, ensure that all cameras and peripheral devices
are connected and turned on. This will ensure that all connected cameras and hard disk space
is available and recognized in the setup calculations.
Please Note:
This Quick Setup Guide has been written around the DX-TL5000E DVR.
It can be used for the DX-TL4516 and DX-TL4509, but some of the listed features are
not supported.
The DX-TL4516/09 does not support the following functions;
Cascade connections
Optional SCSI interface, XGA output and Audio card.
NAS support.
The Recording Rate for the system is 100pps.
3