Toshiba dynadock U3.0 User Manual page 28

28
Using the dynadock™ and Adjusting Settings
the computer, the audio ports on the computer are automatically
re-enabled.
To change the default settings, you may need to manually adjust the audio
settings in Windows
to use the computer's audio ports while the computer is docked, you will
need to change the default settings.
Configuring audio playback ports
1 Click the dynadock U3.0 icon in the system
tray/notification area of your Windows
(Sample Image) TOSHIBA dynadock™ U3.0 icon
NOTE
2 Select Audio Setup from the menu.
3 On the Playback tab of the Windows
select one of the following:
❖
❖
4 Click Set Default.
5 Click OK.
NOTE
Configuring 5.1 surround sound
1 Click the dynadock U3.0 icon in the system
tray/notification area of your Windows
(Sample Image) TOSHIBA dynadock™ U3.0 icon
NOTE
®
, as described in this section. For example, if you want
If the icon is not visible in your system tray/notification area, make sure the
dynadock™ is connected and docked, and then click the Show Hidden Icons
button ( ), if necessary, to display hidden icons.
To use the dynadock's Headphone/Speakers/Line out jack, select
dynadock Audio device.
To use the docked computer's Headphone/Speakers/Line out
jack, select the appropriate playback device (other than dynadock
Audio device).
If you make any changes to your audio settings, you may need to restart your
media player for the audio changes to take effect.
If the icon is not visible in your system tray/notification area, make sure the
dynadock™ is connected and docked, and then click the Show Hidden Icons
button ( ), if necessary, to display hidden icons.
®
desktop.
®
sound settings dialog box,
®
desktop.