Static (Assigned By Isp) - D-Link AC750 User Manual

Section 3 - Configuration
Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP
address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields
must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address
if it is not in this format.
My Internet Select Static.IP to manually enter the IP settings supplied
Connection: by your ISP.
Advanced DNS Check the box to enable Advanced DNS Service.
Service:
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
Default Gateway:
Enter the Gateway assigned by your ISP.
DNS Servers:
The DNS server information will be supplied by your ISP
MTU:
Maximum Transmission Unit - you may need to change
the MTU for optimal performance with your specific ISP.
1500 is the default MTU.
MAC Address:
The default MAC Address is set to the Internet port's
physical interface MAC address on the Broadband Router.
It is not recommended that you change the default MAC
address unless required by your ISP. You can use the Copy.
Your.PC's.MAC.Address button to replace the Internet
port's MAC address with the MAC address of your Ethernet
card.
D-Link DIR-810L User Manual
Manual Internet Setup

Static (assigned by ISP)

30