Assembly - Kenmore 415.16135110 Use & Care Manual

ASSEMBLY

1
Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place,
shown A. Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U
Pin and repeat for remaining casters. Make sure the two locking casters are secured at the rear and the
non-locking casters are secured at the front. After all 4 casters are secure remove the Bent U Pin and
save for future maintenance.
Bent U pin
Qty.1
Rear
Bottom shelf
Non-locking caster
Locking caster
Front
A
Bent U pin
464224411 • 15