Huawei WS322 User Manual page 9

WS322 300Mbps Wireless Router
User Guide
Reset button
Status indicator
Signal strength
indicator
ETH port
Table 1-2 Using the WPS Button for Quick Configuration
Function
WPS
connection
Switching the
working mode
After the WS322 is powered on, press and hold the Reset
button for 6s or more to restore the WS322 to its factory
settings.
Restoring the WS322 to its factory settings will erase your
user-defined data.
Shows the WS322 working status. For details, see section
1.2.2 Indicators.
Shows the network signal strength. For details, see section
1.2.2 Indicators.
Connects the WS322 to a network device.
Operation
Press and hold the WPS button more than 1 second and less than
3 seconds, and press the wireless client's WPS button within 2
minutes.
When the status indicator turns from blinking to steady on,
the connection is set up.
Press and hold the WPS button until:
the indicator starts blinking to switch to WiFi Router
mode.
the indicator starts blinking to switch to WiFi Client
mode.
the indicator starts blinking to switch to WiFi
Repeater mode.
1-3
1 Product Overview