TABLE ONTENTS TABLE OF CONTENTS ..2 INTRODUCTION ....3 ......3 BOUT EDIA ONVERTER ........3 RODUCT EATURES INSTALLATION ....3 ..3 ELECTING A ITE FOR THE QUIPMENT ......4 ONNECTING TO OWER ......4 NSTALLING IN A HASSIS LED I ...........
Media Converter, The Converter introduced here provides one channel media conversion between 100BASE-FX and 100BASE-FX. About Media Converter Media Converter is a network technology specified by IEEE 802.3u 100BASE-FX standards. Product Features One-channel media conversion between 100BASE-FX and 100BASE-FX Fiber media allows: multi-mode fiber and...
The ambient temperature should be between 32 and 104 degrees Fahrenheit (0 to 40 degrees Celsius). The relative humidity should be less than 90 percent, non-condensing. Surrounding electrical devices should not exceed the electromagnetic field (RFC) standards for IEC 801-3, Level 2 (3V/M) field strength. Make sure that the equipment receives adequate ventilation.
the chassis: Step 1- Unscrew and pull out the media converter board. Step 2- Plug in the media board to any of the vacant slot. Step 3- Fit the converter onto the carrier and use the screw to secure it. LED Indicator The LED indicators give you instant feedback on status of the converter:...
Not Linking Linking on port Lights on FX-2 LINK-2 Lights off Not Linking PECIFICATIONS Standards: IEEE802.3u 100BASE-FX Data Transfer Rate: 148800pps for 100Mbps Duplex Mode: Full Duplex Mode LED indicators: PWR, LINK-1, LINK-2 Media Interface: EMI Compatiblity: FCC Class B...