Model Information Settings Fields; Status Menu; Display Status Menu - Cisco 3905 Administration Manual

Model Information Settings Fields

Model Information Settings Fields
The following table describes the Model Information Settings fields.
Table 10: Model Information Settings for the Cisco Unified SIP Phone 3905
Option
Model Number
MAC Address
Active Load ID
Boot Load ID
IP Address
Active Server
Stand-by Server

Status Menu

The Status menu includes theses options, which provide information about the phone and its operation:
• Network Statistics: Displays the Network Statistics screen, which shows Ethernet traffic statistics.
• Call Statistics: Displays counters and statistics for the current call.

Display Status Menu

To display the Status menu, perform these steps.
Procedure
Step 1 Press Applications.
Step 2 Select Admin Settings > Status.
Step 3
To exit the Status menu, press Back
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
58
Description
Model number of the phone.
MAC address of the phone.
Version of firmware currently installed
on the phone.
Identifier of the factory-installed load
running on the phone.
IP address of the phone.
IP address or name of the server to
which the phone is registered.
IP address or name of the standby
server.
.
Model Information, Status, and Statistics
To Change
Display only - cannot configure.
Display only - cannot configure.
Display only - cannot configure.
Display only - cannot configure.
Display only - cannot configure.
Display only - cannot configure.
Display only - cannot configure.