Getting Started; Install The Sim Card - Motorola ET1 Quick Start Manual

Introduction
This guide covers the following configurations:
ET1N0 (WLAN only)
•
ET1N2 (WLAN and WAN)
•
ET1N0 and ET1N2 with scan modules.
•

Getting Started

To get started:
Install SIM card (ET1N2 with GSM)
•
Install the battery
•
Charge the battery
•
Start the ET1
•
Activate the ET1N2 on a mobile data network.
•

Install the SIM Card

The ET1N2 requires an activated SIM card. Obtain the card from
a service provider.
1. Lift the access door.
2. Insert SIM card into SIM holder with the contacts facing down
and the cut edge facing away from the holder.
Close the access door.
3.
SIM Card
5