Pc Connection - Haier HL37E Owner's Manual

External Equipment Connections

PC connection

How to connect
1
. To get the best picture quality, adjust the PC graphics card to 1024
2
. Use the TV`s PC or DVI (Digital Visual Interface)Audio IN port for video connections, depending on your PC connector.
If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of eitherPC
display the PC on the TV.
If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to eithe
set to Plug and Play automatically by the TV.)
3
. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as required.
How to use
1
. Turn on the PC and the TV.
2. Turn on the display by pressing the POWER button on the TV's remote control.
3
. Use INPUT on the remote control to select PC or HDMI source.
4
. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC
mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness
and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic
card or consult the manufacturer of the PC graphic card.
NOTES:
1 Use a DVI cable.
2 Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently imprinted on the
screen.
3 The synchronization input form for Horizontal and Vertical frequencies is separate.
Resolution
Frame
Resolution
Mode
frequency
(Hz)
PC 640*480 60Hz
SPC
800*600 60Hz/75Hz
60Hz
XGA
75Hz
1024*768
x768 .
PC
HDMI1
ANT IN HDMI2
Installation
IN o r DVI IN to
r PC or DVI; (the other mode is
PC/DVI
OPTICAL
AUDIO IN
Owner s Manual 13