Table of Contents
Advertisement
OPERATING INSTRUCTIONS
INPUT SELECT button
Input Switching
Size Switching
Each time the ZOOM button of the remote control is
pressed, the screen display size will change in sequence
and the status will be displayed at the bottom of the
screen.
• During VIDEO signal input (AV1, AV2, AV3, AV4,RGB1)
(set to [DVI-STB])and RGB2(set to[component])
4:3
Panoramic
Full
Cinema
Full
Display size selection diagram
When you want to
When you want to
Play a 4:3 image in a 16:9 screen faithfully.
Play a 4:3 image in a 16:9 screen faithfully.
Play a 4:3 image in a 16:9 screen with the
Play a 4:3 image in a 16:9 screen with the
height and width of the middle of the
height and width of the middle of the
screen enlarged on equal scales and with
screen enlarged on equal scales and with
both sides appearing somewhat enlarged.
both sides appearing somewhat enlarged.
Play a 16:9 VISTA size image in the 4:3
Play a 16:9 VISTA size image in the 4:3
image faithfully reproduced on the 16:9
image faithfully reproduced on the 16:9
screen.
screen.
Play a 4:3 image faithfully in a 16:9 screen
Play a 21:9 Cinema size image in the 4:3
in the standard vertical size and
image expanded vertically on the 16:9
horizontally squeezed.*
screen.
Play a 4:3 image faithfully in a 16:9 screen
Play a 14:9 image in a 16:9 screen
expanded vertically and squeezed
in the standard vertical size and
horizontally.
horizontally squeezed.*
Play a 14:9 image expanded vertically on
the 16:9 screen.
Zoom
Set the display size to
Set the display size to
Input signal
Input signal
4 3
4 : 3
Panoramic
Panoramic
(4:3 signal)
(4:3 signal)
Zoom
Zoom
(Vista)
(Vista)
Cinema
Full
(Squeeze)
(Cinema)
C14 : 9L
Full
(14:9 signal)
(Squeeze)
14 : 9Zoom
(14:9 signal)
P+
-
OK
D VD
1
2
4
5
7
8
0
RGB/VIDEO
AV1
AV2
buttons
TV
AV1
AV2
AV3
RGB2
RGB1
AV4
• During AV4 signal input
Auto
Full
14:9Zoom
C14:9L
• [Auto] is the mode using the Switch signal from the equipment
connected to AV4 terminal included in SCART connector No.8 pin
which indicate the picture format of the video source. When Switch
signal has not been detected, Default Zoom setting in the Function
Menu is used to choose.
• And during some input mode except AV4, if the Switch signal is
detected under the condition that [Auto] is selected for the picture
size of AV4, the input mode will automatically transfer to AV4.
Display screen
Display screen
Blanking occurs on both sides.
Blanking occurs on both sides.
• The 4:3 image is called a letterbox image.
• The 4:3 image is called a letterbox image.
• In some cases, some slight blanking may
• In some cases, some slight blanking may
remain at the top and bottom.
remain at the top and bottom.
* An image with an aspect ratio of 16:9
In some cases, some slight blanking may
shrunk horizontally to 4:3 to display in a 4:3
remain at the top and bottom.
screen
* An image with an aspect ratio of 16:9
This mode is provided for the broadcasting
shrunk horizontally to 4:3 to display in a 4:3
program with WSS code-C14:9L.
screen
This mode is provided for the broadcasting
program with WSS code-14:9Zoom.
+
P-
FREEZE
ZOOM
ZOOM button
3
6
9
AV3
AV4
RGB1
RGB2
Zoom
Remarks
Remarks
29
Advertisement
Table of Contents
