Preparing The Opening - GE PGP953 Installation Instructions Manual

Installation Instructions
PREPARING THE OPENING
r_] MAINTAIN THE FOLLOWING
MINIMUM CLEARANCE DIMENSIONS
13" IVlAX. Depth of unprotected
R - IVllN.clearance
from cutout to right
side wall
I
30" MIN. clearance from
countertop to unprotected
overhead surface
I
C - NIN. I
clearance from I
cutout to rear
wall
L - MIN. clearance
from cooktop to left
side wall
2-1/2" MIN from
cutout to front of
countertop
50" or wider
cabinet base
18" MIN. height
countertop
to nearest
cabinet on either
side of unit
NOTE: All gas cooktop models require 7/16" free
area below cooktop bottom to combustible material.
L R C
PGP953 3-3/4" 6" 2-1/4"
PGP959 12" 12" 2-7/8"
CGP350 12" 12" 2-7/8"
ALL HORIZONTAL CLEARANCES MUST BE MAINTAINED
FOR A MINIMUM OF 18" ABOVE THE COOKING SURFACE.
[_] OVERALL COOKTOP DIMENSIONS
30- ------j__- 21-
'"T
19-3/8" q_.._
]-Z/4"
[]] CUTOUT DIMENSIONS OF
COUNTERTOP
To ensure accuracy, it is best to make
a template when cutting the opening
in the counter.
/8" width cut
[]-] RECOMMENDED GAS SUPPLY
LOCATION FROM BACKWALL
Recommended
gas supply
location
r' Min. From Backwall
From Cutout
Center Line
[_] MAKE SURE WALL COVERINGS,
COUNTERTOP AND CABINETS
AROUND COOKTOP CAN
WITHSTAND HEAT {UP TO 200°F)
GENERATED BY COOKTOP
Wall covering,
cabinets and
countertop must l
withstand heat I